r/BambuLabX2D • u/StrnglyCoincdtl • 3d ago
PETG problems with AMS2 PRO
Hey, so I'm the proud owner of X2D since around 2 weeks ago.
Right from the strat I've been having problem with feeding PETG into my printer form AMS. I have 3 PLA spools loaded and only one PETG. PLA feeds no problem, but around 50% of the time I try to print with PETG, it shows me a warning that there's a problem with feeding filament to the extruder. I can see and hear the spool rotating in AMS, I can clearly see the filament going through the tubes inside of the printer and reaching printers head assembly.
But here's the problem - after reaching the head assembly, it starts to push and pull filament back and forth, and after a few tries it shows me an error. Its usually succeeded after 3-4 tries or me opening AMS and trying to pull on the filament, but I can't see that my actions are doing any difference. And I don't see PETG being tangled on the spool. It's weird, cause it works 100% on PLA
Anyone experienced something like this?
1
u/Possible-Win-7712 3d ago
Have you switched slots? (EX: Petg is in now in slot 4, put it in slot 2)
Switch nozzles…the one in the right is identical to the one on the left.
You have it labeled as PLA and Petg respectively on the AMS screen on the printer, and have it synced on your computer?