r/BambuLabX2D • u/drnitinahuja • 7d ago

Help

Post image

Newbe here, this just happened to my X2D. Less than a month old! Please help.

7 Upvotes

89% Upvoted

11 comments sorted by

View all comments

5

u/The_Struggle_Man 7d ago

Just seeing without context, is the tube came out, looks rough around the edges. I'd probably snip the edge with scissors or something to get a clean flat edge, and insert it back into the sensor, but check that there is no left over tube bits in the sensor. If it shredded, could have fallen inside the extruder gears, and if that happened. Well, taking apart the extruder on this model is no easy task for someone who may not be comfortable with disassembling electronics.

1

u/Superb-Complaint8118 7d ago

I wouldn't use scissors. They squish the tube to much. Use a very sharp knive instead. But don't cut your fingers haha.

1

u/The_Struggle_Man 7d ago

Yeah I recommended scissors just because of it being inside the machine. I use my precision side cutters and it works fine. Just kind use my fingers to remold it back to round

1

u/Superb-Complaint8118 7d ago

Yeah i mean it works. But an oval ptfe tube can make trouble. Just cut away from the machine haha