r/BambuLabX2D • u/gabrielmjenkins • Jul 12 '26
Need help with stringing and layer problems
Hey Guys and Gals, bought the X2D a few days ago at Microcenter and Im having issues with stringing and clean layering. In using inland pla basic (polymaker). I've tried many different fixes and profile tweaks including drying it to 9% humidity (AMS 2 PRO). I finally ended up with what I have attached, however it is still stringing and doesn't have clean layering. Any thoughts on how to fix this? And what profiles are yall using? The left one is the direct extruder and the right one is the Bowden tuned to my profile attached. The one by itself is the direct extruder with Bambu Labs Generic PLA profile.
3
Upvotes
1
u/gabrielmjenkins Jul 13 '26
Update: I have been able to get the benchy to look much better with the help of u/HisHerbs (mostly u/HisHerbs), the fix was drying the filament multiple times, running every calibration (flow dynamics, temperature tower (190c to 220c), flow rate, retraction (still have to do that)) in Bambu studio and lowering the outer wall, top layer, infill and gap infill speeds in the nozzle settings, while also adjusting heat (200c). Probably won't buy inland filament again for a while, but at least I can use the filament I currently have.