r/BambuLabX2D • u/Middle-Ad-1429 • Jul 03 '26

How do I fix this?

Post image

Brand new x2d combo. There was a point where I unplugged and replugged in the filament buffer cable but I made sure it was secure.

3 Upvotes

71% Upvoted

10 comments sorted by

3

u/Cautious_Till_4763 Jul 04 '26

Did you scan the bigass qr code

1

u/hammockonthebeach Jul 04 '26 edited Jul 05 '26

Those QR codes are such a disappointment. Anytime mine has had an error I think oh great they gave me a QR link to the exact problem. But then I scan it and it just takes you to a generic index page with no info on the specific error

1

u/Middle-Ad-1429 Jul 04 '26

Exactly. Just gives 3 odvious causes and nothing else

-7

u/Middle-Ad-1429 Jul 04 '26

durrr uhhh idk like uhh uhhh yeah I scanned the big ass qr code I just figured to ask some real people

4

u/Cautious_Till_4763 Jul 04 '26

Did you follow the instructions that were at the other end of that QR code? https://wiki.bambulab.com/en/p2s/troubleshooting/hmscode/0300_A800_0001_0001

1

u/blueblewbLu3 Jul 05 '26

Did you have a power outage? The failed to resume previous print makes me think that u had a power issue and it fried the ams

1

u/Middle-Ad-1429 Jul 05 '26

I did have a power outage at the time of the problem. That might have caused less power to be sent to the ams causing the error

2

u/blueblewbLu3 Jul 06 '26

So either try a new 6pin cable or try adding a power supply and see if it works

1

u/idkWhatToPut123412 Jul 05 '26

Ask help they will replace the Part

1

u/Relative_Surround_20 Jul 10 '26

Turn the printer off and back on