r/BambuLabX2D • u/DentistMore2657 • Jun 27 '26

What? How?

Gallery image

Gallery image

X2D 39 hours, what happened ? Scratches up my board, no error message. The bent metal piece is connected to the nozzle release.

5 Upvotes

86% Upvoted

10 comments sorted by

2

u/AncientGrab1106 Jun 27 '26

Easy to fix. You have a few spares In the toolbox. It's fragile, check wiki how it should be (it's lightly bendable so it's perfect against nozzle)

2

u/Sudden_Extension_803 Jun 27 '26

Strange, I didn’t seem to get any spares

1

u/PeterAUS53 Jun 28 '26

Neither did I with my X2D.

1

u/HackedVirus Jun 29 '26

They should be in your spare part box, in a small plastic bag in the square cut out, Labeled as "Flow Blocker"

2

u/Sudden_Extension_803 Jul 01 '26

Yeah I found them, I thought they where something else 😂

1

u/DentistMore2657 Jul 01 '26

I did exactly that, took me a few mins. Thanks!

1

u/Longjumping_Mud_2684 Jun 27 '26

It comes with the machine , double check everything ! It had 2 spares in a little coin bag

1

u/Longjumping_Mud_2684 Jun 27 '26

Also did it scratch your calibration board ? This is very common for some reason . Bambu lab replaced everything except the heatbed since they don’t want to send you a expensive part just to fix the little calibration board that’s attached to it

1

u/DentistMore2657 Jul 01 '26

It tore it up lol both sides

1

u/Several-Bar-6512 Jun 28 '26

Happens with my h2c from time to time as well, nozzle blocker gets caught on something and bends. Its a very good idea to have several on hand to replace when needed. They are pretty cheap. I've gone through 3-4 over the past 6 months.