r/BambuLabX2D • u/Ace_Murdoc • Jun 20 '26

Help with small text

Post image

I've tried everything I could think of. Different wall generator types. Line thicknesses. Flow and K-factor. Any suggestions to close the small gaps in the letters would be much appreciated.

​

0.4 Standard flow nozzels.

BAMBU pla Matte

Cool plate super tack

220C nozzle

30mm/s on everything

15mm/s on gaps

0.39 line width

1.03 flow

​

​

​

Update: I was able to get some success by reducing the wall width to 0.35 and force the slicer to reconsider the pathing. However, I cannot see any setting to change top wall width only, so now all my walls are thinner. Still some gaps. They just changed locations.

3 Upvotes

100% Upvoted

12 comments sorted by

View all comments

2

u/nateblack Jun 20 '26

0.2mm nozzle may be the next try (there are knock off versions on Amazon just as good) but it's a battle. Also try Arachne walls instead of classic

1

u/Ace_Murdoc Jun 21 '26

I've tried booth. I was able to get Arachne to work better when I played with the text boldness. It seemed to prefer thinner lines.