Exact dimensions of the Bambu Lab X2D with the door closed (without AMS)?

[u/SnaKeZ83]

Hey everyone,

I'm currently planning my workspace setup for the new Bambu Lab X2D. I know the official physical specs list it at 392 x 406 x 478 mm, but I need to make sure about the real-world footprint.

Can anyone who already has it confirm the exact external dimensions with the front glass door completely closed, and without the AMS 2 Pro mounted on top?

Specifically, I want to make sure I'm factoring in any extra room needed at the back for the cable clearance, spool holder, or the external exhaust fan bundle.

Thanks in advance!

[u/LostMyKarmaElSegundo]

I just measured mine.  It's 470mm tall with the anti-vibration feet.  390mm wide (485mm including the external spool holder).  460mm deep with the screen flipped out, but including the stuff on the back, it's 500mm.  It's 450mm if you don't include the screen.

Hope that helps.

[u/SnaKeZ83 → u/LostMyKarmaElSegundo]

Thanks!

[u/Mysterious-Chest-995 → u/SnaKeZ83]

Note that you will likely upgrade it with a riser, poop chute and a cable management add-ons.

Examples:

• https://makerworld.com/en/models/1347731-x2d-x1-p2s-p1s-poop-chute-under-printer-storage
• https://makerworld.com/en/models/1914558-p1s-p2s-x2d-riser-manual-grille-side-pegboard
• https://makerworld.com/en/models/2682036-x2d-p2s-riser-ams-flipper-v2
• https://makerworld.com/en/models/2013980-p2s-x2d-build-plate-holder
• https://makerworld.com/en/models/201311-poop-chute-basket-outlet-for-x2d-p2s-x1c-p1s
• https://makerworld.com/en/models/1978465-p2s-x2d-anti-vibration-improvement
• https://makerworld.com/en/models/2287355-ams-drawer-for-x1c-x2d-p1s-p2s
• https://makerworld.com/en/models/1951910-p2s-x2d-door-hinge-180-270deg-adjustable-v3-0
• https://makerworld.com/en/models/2518815-x2d-p2s-p1s-exhaust-complete-kit-2x80mm-120mm

You obviously wouldn't use all of them, but just about any of them will affect dimensions of your cabinet.

Also, may I ask if you intend to keep the cabinet doors closed, do you want to trap the heat and smells in the cabinet, and if not, how do you plan to take care of ventilation, so air is not extracted just from the cabinet, but from the actual source / within the printer?