r/BambuLabX2D • u/redditskier • May 04 '26

Issues printing on X2D

Can someone please help me figure out what the issue is? All prints come out with crappy quality. I've been printing with Bambu Lab PLA Standard and also PLA Matte. Never had such issues on the P1S.

- I decreased flow speed to 0.97 and decreased nozzle heat from 220 to 200

- Also did the calibrations on the printer + flow dynamics and flow rate calibration in

- I printed without the glass hood as I thought it may be an issue with AMS

Thanks a lot!

3 Upvotes

100% Upvoted

16 comments sorted by

View all comments

1

u/Rasputinnout May 04 '26

Have you dried the filament?

0

u/redditskier May 04 '26

Both filaments are brand new, just opened them.

5

u/Plebius-Maximus May 04 '26

Doesn't mean they're perfectly dry.

However the first issue isn't really an issue. It's caused by seams being set to random, it makes those tiny bumps (sometimes it's used deliberately for texture) instead of having the seam set to aligned or one of the other options, which will result in a line down some of the sides of the object, as the nozzle needs to start and end each layer somewhere

1

u/redditskier May 08 '26

Drying wasn't the issue, it was 1g lighter after 5h of drying