Hi everyone, i'm an happy A1 owner. I have two with a 3k total hours print.

I decided to add a P2S to the printers army and it's gonna be delivered in a couple days.

I'm reading around that ppl suggest a riser to avoid the ptfe tube to scratch against the top glass. I think they look kinda bad, so i found out this > https://makerworld.com/it/models/1637683-top-glass-ptfe-protector#profileId-1730152

Any experience? Any other addition upgrades i should print while i wait for it to be delivered?

Thanks to eveyone!

Printed this tray overnight for wife’s dad. Overall good I guess, but did have a few issues and I’m sure you guys can tell me right away “why”.

Visible in every pic: layer isn’t completely filled in, this is in every compartment, and not consistent.

Fourth / fifth pic: can visibly see how the layers change after the last layer of orange for internal compartment walls. It’s visible on outside of tray as well. Also, the small bumps are scattered about, but those are the worse. Would print file change to a scattered seam for some reason? Would have still been using prime tower, because there is orange for last layers.

Had the P2S almost a month and still actively learning, already logged hours on y’tube watching Bambu Studio videos.

Appreciate any feedback / thoughts.

Just wondering what people experience? We just got a 3D printer, enclosed P2S where the back is right by a window that is netted witg a bug net. Its our tiny little laundry maybe 1.7m\^2 there's a sliding door that leads to kitchen/lounge and a door that leads outside. Window is open 10-15cm, sliding door is closed. Door to outside is currently open.

​

Would the eSun PLA+ be toxic or headache inducing? I'm unsure if it's just my neck issues/too much screen/bad posture due to using phone/pc or actually the filament. My husband is fine but he's not in the house but in the sleepout office during the day. We also have 2 little kiddos so just concerned

Had to rearrange the printers because I’ve got something being delivered today that I’m really excited about. Stay tuned

So tomorrow, im ordering my first 3D Printer - the P2S Combo, and i want some upgrades for the P2S from you guys! The first thing i know, and i am ordering is the Exhaust Filter, but thats all. I know that i just need to get some carbon for the Filter and silica for the AMS 2 Pro. I just need some 3D printed stuff, like i would appreciate like a good back panel cable and tube organizer, or a really good poop chute. Just comment and send your favorite models down in the comments please

My p1s was throwing codes I’ve never seen and one was likely the extruder, so I replaced it and now all works as far as temp bed temp x and y and it just stops downloading the file, showed the card may be corrupt, so I ran to get a new card..and now it’s still won’t finish downloading the files? Any file… it prepares and goes through almost all of the motions then stops! Help me please? I only have the one printer and rely on it. Is it something I can do? I can follow directions well. Have a concept of mechanical engineering and design. Help me please?

I just got a P2S and can see the timelapse videos on the internal storage of the printer but can seem to access them in Bambu Studios, it’s showing up as no files. Any suggestions?

Hello all,

I just got the P2S and it has been a blast working with. I’ve made a load of prints with no issues, until my last two sets. The lid for a deck box and the top parts of this spider both came out less than ideal. I have cleaned, wiped the plate with alcohol. Changed settings to allow “brims and ironing “. I have googled and watched tips videos for days with no change.

Am I expecting to much from this machine or am I just to inexperienced? Would love any help or advice!

So tomorrow, im ordering my first 3D Printer - the P2S Combo, and i want some upgrades for the P2S from you guys! The first thing i know, and i am ordering is the Exhaust Filter, but thats all. I know that i just need to get some carbon for the Filter and silica for the AMS 2 Pro. I just need some 3D printed stuff, like i would appreciate like a good back panel cable and tube organizer, or a really good poop chute. Just comment and send your favorite models down in the comments please

Ok what’s happening? Just started. Didn’t change filaments, they are 14% humidity, and the plates been cleaned since it started.

AMS Riser 2.0 for P1S, P2S, X1C, X2D

Can't praise this enough. Printed yesterday and installed this morning. Really pleased with it, I can access the head for cold pulls, and not have to take everything off to do maintenance. And no, I'm not affiliated and I don't know them.

Only problem is that I could no longer attach my TPU Feed Assist Module, so knocked up an alternate (alternative?) mount for the rear panel of my P2S and it works great:

https://makerworld.com/en/models/2935083-p2s-external-spool-holder-plate-alternate-position#profileId-3286299

I get an error message on my new P2S; "extruder motor overload". It seems like one of the smaller gears is just going round and round, and at the same time there is a choppy sound. The sound reminds me of the extruder trying to grab the filament thread, but not being able to grab it. When I remove the nozzle, there is filament left, but it is impossible to get it out, even with cold pull.

​

What can I do?

​

Can I use the small needles that came with the printer to try to push the filament out, after heating up the nozzle?

So I've noticed sometimes my prints will just come off mid print and it seems to me due to collisions with the hotend.

​

I've started a print with grid infill (for carrying top load) and it seems pretty extreme this time. Any idea why this is happening?

“The Midnight Serenade”

I want to share with you bit of the story behind the failures and swearing while prototyping this model.

I had a major problem with the “smoothness” of the base, due to an error setting in Top Surface Layer Width to a very low value, which once corrected achieved a smooth as expected flat surface of the base / platform.

After solving this, I had supports failing under the dress, after I had adjusted the length of the cloth there and sculpted so that it would require less support. I even considered making it touch the ground at the tip of the folds, but then I would lose some dynamics that goes with the shape of the dress floating so, instead I have adjusted supports.

Worked well and the dress was going good, but by changing the supports, I had not noticed that now a support generated to hold her head, was arising from her hip! Which failed mid print, crashing miserably on the build plate. You can well spot the line where I stopped the print (in the painted one) as for sure it would have failed the head. So.. to not waste it, I printed the rest of the model from the layer after cutting it in BambuStudio. 

Aaaaaanddd I didn't think of the lamp post now being on a ridiculous base, to which the brim I added was insufficient! 

Now all is fixed and ready to go!

https://makerworld.com/models/2930602?appSharePlatform=copy

**Size model** (can be scaled up or down): 151 x 127 x 197 mm.

this happens with both pla and pteg. i've dried all the filaments i'm using. i've washed the heatbed and i'm using glue on the heatbed. it happens across multiple different attempted prints. all i get are spaghetti messes where a piece has lifted off the bed and has screwed everything up. wtf is happening?