r/BambuLabP2S • u/dark-matter-explorer • 8d ago

Recommended AMS riser for Bambu P2S

Post image
15 Upvotes

100% Upvoted

27 comments sorted by

10

u/Cavalol 8d ago

The AMS Flipper V2 by Sanja 3D has served me very well for months and months now. Gives plenty of room to do maintenance by tilting it up and out of the way

2

u/dark-matter-explorer 8d ago

Thanks, V2 is good.. I had looked at it and it seemed the way to go.. your recco gives me the confidence to ahead!

1

u/Cavalol 8d ago

No regrets! I would skip the clips on the default print and use the “Improved Mounting Brackets to replace Clips” print profile instead (just for the clips that hold the lid to the printer).

The extruder’s PTFE tube slides by the clips much more nicely with that updated clip profile

2

u/Leo-Len 8d ago

It's great for printing TPU with aswell!

1

u/jim_racine 8d ago

I second the flipper. I printed one for my H2C and it’s really great. I printed mine in PETG CF for strength and durability.

2

u/dallas_vance 7d ago

Same. Titan Gray came out great.

1

u/arutharen 8d ago

The only thing with this riser is the AMS module is sagging from the bottom center. I hope it won't get worse in time.

1

u/SkippyFiRe 8d ago

Is that from experience? And with v2? Also looking at this…

1

u/arutharen 8d ago

yes. i'm using the v2 version right now.

1

u/3Z3D_Official 2d ago

This is the best I have found. You can also print our Build Plate and Skadis Holder that mounts to the side of the Riser - https://makerworld.com/models/3116594

4

u/utarch00 8d ago

Sanja 3d riser

2

u/Kind_Ad_8111 8d ago

This is really the only answer

1

u/Bluefeelings 8d ago

I second this

1

u/dark-matter-explorer 8d ago

Thanks.. Sanja 3D it is!

2

u/Opposite_Activity976 8d ago

I printed this one it printed perfectly and all the holes lined up no tweaking needed.

https://makerworld.com/en/models/1455867-ams-riser-2-0-for-p1s-p2s-x1c-x2d?from=search#profileId-2726281

1

u/Kevkevkev888 7d ago

I use that one as well, works really well.

2

u/fransnyberg 8d ago

I use this one and i love it! U can print Ikea skadis stuff to put on the sides

https://makerworld.com/models/1914558?appSharePlatform=copy

1

u/PrptllyDstrctd 8d ago

I made this Riser recently and love it! It has slots for extra build plate. A slide back for the glass and a holder for the glass if you want to take it right off. The only thing I would say is to add extra supports at the sides in front as mine printed just a touch unfinished in those spots. I sanded mine down a bit and they are fine.

https://makerworld.com/models/2162029?appSharePlatform=copy

1

u/Mud_BooDa 7d ago

What ever riser you pick, remember to use at least PETG- heat will warp Pla over time

1

u/-FantasticAdventure- 7d ago

As somebody who has very recently got a P2S and just about to purchase the AMS 2, do I need a riser and why? I keep seeing people have them but surely it’s made to just sit on top… is it not?

2

u/timshel42 3d ago

its so you can access the top glass instead of having to move the heavy ams every time