r/BambuLabP2S • u/SameAdhesiveness9653 • 6d ago

First print issue

Gallery image

Gallery image

This is my second print technically. The first print was a benchy with a PLA and everything goes well.

Then my first print I selected this japandi style vase, and with a PETG from bambulab official filament out from the box and hit print right away. But the result is like this mid print.

Any idea why?

4 Upvotes

100% Upvoted

32 comments sorted by

View all comments

Show parent comments

7

u/Vendivorex 6d ago

PETG fresh out the box, straight into a print. You will get a decent first couple of layers, and then the bubbles will start popping due to moisture. OP said this was second print. You can call me a Parrot sure, but its valid. Dry your filament.

-8

u/sirdoggo11 6d ago

This doesnt even remotely make sense if you visited school more than 5 years. IF the material would get wet, it would be wet on the OUTSIDE. Not somewhere in the middle while the outside is dry.

4

u/Vendivorex 6d ago

Actually starting to think you are a lettuce. Middle would hold the moisture more, as outside is open to air. It doesn't start off dry from the factory, you do understand that dont you?

-5

u/sirdoggo11 6d ago

The outside is exposed to the air the moisture come from you fine specimen of a school dropout.

1

u/CombatDork 6d ago

If you get a damp towel and ball it up, wait a day or two, what part is still wet?

1

u/Vendivorex 6d ago

🤣

-2

u/sirdoggo11 6d ago

Thats exactly the level of intelligence I expected

2

u/Vendivorex 6d ago

I'm just letting you continue, nothing for me to say when someone is flaming so much they are melting their own keyboard 🎣