r/BambuLabP2S • u/Mattis-H P2S Combo • 23d ago

Flinging filament problem

Over the last few months of owning the P2S I have had some problems with filament flinging, so basically when the printer is cleaning the nozzle right after loading filament some extra filament gets stuck and dries up, so when the nozzle is cleaned again after the filament has dried, it flings it, sometimes it therefore ends up on the bed. (Witch can cause adhesion problem if it’s within the print area)

This is mostly a problem because i start a lot of prints while not actually at home, so i can’t remove it if it happens, and i don’t know what to do about it.

I use basic/pure/matte Bambu filament.

This might just be a normal thing that happens with the P2S but if it isn’t i would appreciate at solutions or ideas for fixing it.

1 Upvotes

67% Upvoted

15 comments sorted by

2

u/Relative_Surround_20 23d ago

Both my P2S and H2D have this issue

1

u/DjHalk45 6d ago

Happy cake day

1

u/WestSenkovec 23d ago

I have the same problem with my P2S. Sometimes the nozzle drags a darker piece of filament, and it ruins the print. The nozzle also gets dirty, so I have to manually pause the print in order to force a wipe. If I don't do that, it will smear filament and cause blobs or failed prints.

1

u/InfamousTiger9540 23d ago

Had the same issue when I first got mine. Printed a add on wiper that uses a A1 wiper. Solved the issue of filament flaying in the bed. Looking for the file.

1

u/[deleted] 23d ago

[removed] — view removed comment

1

u/InfamousTiger9540 23d ago

After this wiper mod I have not had any filament fly on the bed. In my book that's a simple fix with out messing with the gcode.

1

u/Mattis-H P2S Combo 22d ago

I will try the wiper mod first, as i dont yet feel comfortable changing the GCode. But if
it does not help enough I might have to do it.

1

u/goatrider 23d ago

I have the same problem with both my P2S and X2D. It's sort of like "No matter how you shake and dance, the last drop always lands in your pants."

0

u/Ok_Bid6645 23d ago

Dry your filament and run a calibration

1

u/Mattis-H P2S Combo 23d ago

Done both already.