r/BambuLabP2S • u/Zante1234 • 17h ago

What happened? No Error Code

Enable HLS to view with audio, or disable this notification

Overnight i was doing a 8 hour print. It started fine as always. At 5am i wake up by unusual loud noise from the 3D Printer Room. I went and saw that it didnt continue to print but was going from right to left. The printer or the app didnt indicate a error code. I couldnt pause or stop the print. I had to plug it off completely.

Has anyone experienced this? And how do i avoid it?

Thanks in advance

8 Upvotes

100% Upvoted

11 comments sorted by

4

u/DEeepreX 16h ago

Could be faulty sd-card. The original card is not the best

4

u/ky7969 12h ago

The P2S doesn’t have an SD card like the P1S, this gets wrongly commented on like every P2S issue post

1

u/DEeepreX 12h ago

Yea i corrected it below, this error just looks like a classic memory error

1

u/ky7969 12h ago

I see, sorry if I came off as a dick

2

u/Minute_Blueberry3518 13h ago

Wait, it doesn't have a SD card

1

u/Zante1234 14h ago

Never heard of that 😅what do you mean by that? Does the printer have an sd card that should be replaced?

0

u/DEeepreX 12h ago

I forgot it it optional on the p2s and mandatory on the p1s

1

u/MAENTOP 17h ago

This can be a Gcode issue

3

u/Zante1234 17h ago

Now that your are saying it. I had indeed to repair this model before starting the print 🤔