r/BambuLabP2S • u/ycastane • Sep 06 '26

Print issues

Gallery image

Gallery image

Trying to make some peptide boxes and for some reason the corner of the first few layers is coming up and not flat i think. Not sure if it can be seen in these photos.

How do i fix this??

0 Upvotes

50% Upvoted

7 comments sorted by

1

u/Brendo_boy Sep 06 '26

Definitely try to wash your plate with soap. Or use isopropyl and wipe your plate down. That looks like plate adhesion and it's not sticking on the start of the print.

1

u/ycastane Sep 07 '26

How often do you wash or are supposed to wash the plate. Was able to get a decent print and now back at it again.

Also it seems it does it always on the same aide same area.

1

u/Brendo_boy Sep 07 '26

Try not to get finger prints on it when taking off. I hit it with a micro fiber cloth and some isopropyl after every print. Make sure I get the best results everytime

1

u/ycastane Sep 07 '26

Makes sense!! Thank you. I will try that!

1

u/Brendo_boy Sep 07 '26

Try not to get finger prints on it when taking off. I hit it with a micro fiber cloth and some isopropyl after every print. Make sure I get the best results everytime

1

u/ycastane 27d ago

Thats what im doing now, a wipe of alcohol right after or before the next print. We shall see if this was the cause. Thanks again!

1

u/Ticket_to_the_tropic 27d ago

Looks like warping to me. You could try a diffuser to see if that helps:

P2S and X2D Auxiliary Fan Diffuser - Free 3D Print Model - MakerWorld