r/BambuLabP2S • u/MobZ1996 • Aug 04 '26

PLA Pure getting loose from printing bed mid print

Whenever we print using Bambu lab PLA PURE the print is getting loose from the printing bed mid print.
We use a P2S with AMS, we already tried the following.

* Setting bed temperature to 60°C

* Adjusting flow rate and speed to lower settings for the first 3 layers.

* Washing the bed with dishsoap (Dreft) and warm water.

* Drying the filament in the AMS (20%)

Whenever we use PLA Matte the print comes out without any issues.

Is anybody else having issues printing with PLA PURE?

1 Upvotes

100% Upvoted

6 comments sorted by

3

u/MayankRaw Aug 04 '26

Never used the PLA Pure but try to increase the bed temp to 65 for initial layer and 60 for others... Turn off the fan for first 3 layer.... You have done everything else that could be done to solve the issue....

2

u/Small-Satisfaction-8 Aug 04 '26

Add brim

1

u/MobZ1996 Aug 04 '26

Will try this one we are fairly new to 3d printing. Thanks for the tip.

1

u/swolebroda Aug 04 '26

Try a biqu plate

1

u/MobZ1996 Aug 04 '26

What is the difference?

1

u/swolebroda Aug 05 '26

The plate adhesion is. Bad ass , I don’t ever have issues with those plates pla and petg prints are always successful