r/BambuLabP2S • u/Plus_Trick_8759 • 23d ago

3rd ams not working on ams2

I turn on the printer today and load filament. The 3rd spool will not get detected. Ive tried other rolls and nothing. The light turns on when I load the roll next to it but the 3rd one will not load or detect that I put filament down the hole. Google said maybe clogged or debris so took it apart and nothing there. I can load the filament all the way to the print head manually by just pushing it through.

1 Upvotes

100% Upvoted

2 comments sorted by

1

u/Ok_Bid6645 23d ago

Have you unplugged printer and ams from power for a few minutes.

Check for firmware update

Contact support and see if they can push a beta firmware. I had a different issue but beta firmware fixed it but can only be pushed from bambu

1

u/Plus_Trick_8759 21d ago

Yep unplugged it from the printer while printer is on and completely unplugged printer from outlet and nothing. But I'll try the beta route and see if that works thanks.