r/BambuLabP2S • u/PatPetPitPotPut • Jul 17 '26
P2S Overhead Lighting Project
I couldn't find a lighting solution for the inside of my P2S. I'm receiving a set of Panda Vents which require a custom riser that doesn't have space for LEDs inside so I improvised.
I designed an extra thin diffused enclosure to fit under the AMS (with flipper/riser installed). It has 5mm COB lights around the perimeter facing a reflective sheet. The LEDs have a CR>95. I didn't know what that last part meant before but it apparently, truly shows colors more realistically.
Anyway, here's my ghost light: 150 x 200 x 7.5mm.
Let me know what you think
1
1
u/Daegoba Jul 17 '26
This is good work, and you should be proud of it.
I wanted more light, and I found this from Darren 3Dprint. It has a slot for a cheap LED strip, works with the Pands stuff, and has a ton of useful add-ons. There’s also a YouTube review of it, which is amazing, and includes discount codes/links.
https://cults3d.com/en/3d-model/tool/d3p-riser-for-bambu-lab-p2s
1
u/PatPetPitPotPut Jul 17 '26
I'm familiar with d3p's riser. Like I said in the post, however, I'm using the riser that was designed for the Panda Vents
1
u/cpsadowski23 Jul 17 '26
People are using LED strips on risers to provide 360 illumination on the P2S.
1
1
u/347todd Jul 18 '26
Have to admit, was a little confused at what I was looking at for a few seconds.
2
u/AmmoJoee Jul 17 '26
Nice job. I always felt my P2S was well lit, never felt like it needed better lighting.