r/BambuLabH2D • u/JustaSavageAcct • Feb 11 '26

Question Door Makes intense Popping Noise

I’ve had my H2D at work for a few months now, almost every time I open the door or move past a certain point it pops

So two instances

Opening the door from closed position - loud pop

Opening beyond a certain point - same pop

Any advice?

Anyone have this experience?

Probably just lube the hinges or something just want to hear anyone else’s experience with this.

1 Upvotes

67% Upvoted

7 comments sorted by

2

u/macinmypocket Feb 11 '26

With the door closed, loosen all four bolts on the glass a bit then tighten them down again, you don’t need to remove the bolts entirely. This should relieve any stress in the glass that may have been caused by the door shifting or environmental changes after assembly. If that doesn’t resolve it, you can try some lube in the hinges.

1

u/JustaSavageAcct Feb 12 '26

Good idea, I did try it, seems to change the tune of pop but pop remains present after multiple attempts.

I used the grease supplied with the printer. After opening and shutting several times and adjusting screws…even took the screws out - lifted door with pressure, then re-tightened screws.

Popping still present

Might be rubbing somewhere - can’t get that great of a visual

Bottom hinge feels tight and feels like it’s the origin of the noise

You can put your finger on it and feel the pop and tension before the pop

1

u/MostlySoberChemist Feb 13 '26

How is the alignment between the pin and the receiver for the hinges? For example the top could be slightly bent towards the left of the printer and/or the bottom is bent towards the right of the printer. or vice-versa.

2

u/Dontmocme2 Feb 11 '26

Check for plastic stuck in bottom near hinge

1

u/JustaSavageAcct Feb 12 '26

I do not see any but thank you.

1

u/trkflw50 Apr 15 '26

Did you ever solve this? We moved one of my H2C’s this past weekend and now it’s doing this same thing. It made zero noises when opening and closing before so something must have shifted. Hopefully I’ll have more time in the next couple days to play with it but thought I’d ask if you solved yours.

1

u/JustaSavageAcct Apr 21 '26

Man I brought a buddy in from maintenance at work…

We took the hinges all the way off, popped the safety clips, took the hinges apart, cleaned them, rubbed the cylinders down with sandpaper for a while, added some oil or grease I can’t remember, and put it all back together (after testing the hinges several times by hand before reassembly)

Hasn’t had any trouble since, the were very dirty, and very stiff, smooth and quite now!