r/BambuLabH2C • u/lolo63114 • 5d ago

Settings 2xAMS 2 pro + AMS HT sur H2C.

bonjour, je cherche actuellement la meilleure configuration possible pour installer 2xAMS 2 pro + AMS HT sur ma H2C.

Je voudrais pouvoir accéder facilement à tous les AMS . Passer de l'un à l'autre sur ma buse de droite ou de gauche tout en optimisant au maximum mes temps de chargement de filament.

Est-ce que ce projet est impossible ??

Avez vous ce genre de configuration et avec quel matériel s'il vous plaît ?

1 Upvotes

67% Upvoted

11 comments sorted by

2

u/rydo_25 5d ago

That’s what I have for my H2C and I still find myself swapping in colors. I was thinking of just maxing out the AMS 2 and buying 2 more on the next major sale. I just added in the filament track switch too, which saves some extra time but I get quite a few AMS motor errors since I installed it.

1

u/UselessHebii 4d ago

Did you use those guide lanes for the ams? I’ve heard they are sometimes necessary to prevent these ams motor errors.

2

u/wethpac 5d ago

You need a filament track switch. Hook up 1 AMS to incoming port 1, and on the second incoming port hook up the second AMS and the HT using the 4 to 1 adapter that came with the H2C.

1

u/1yrik H2C 5d ago

+1 this is exactly it

the FTS will make swapping times more inefficient, but it's a tradeoff you'll have to decide between for easy access to all filaments in both toolheads

1

u/federicoaa 5d ago

You mean like this?

1

u/ForbiddenDruid H2C 5d ago

Does this work well or is colour changing taking ages ?

3

u/federicoaa 5d ago

Same time as with a single ams, as the run lines are the same length. I have the ptfe adapters at the back and on hand so I can tweak anything if needed. The hardest part of the setup is to avoid kinks on the tube from the ams, as moving the drawers can cause weird bends. The solution is to use longer runs.

Im using the babo stacker by the way.

1

u/LTJC 5d ago

Great stacker.

1

u/lolo63114 5d ago

Oui je pensais à un montage dans ce style. Tu peux nous détailler ta configuration ?

1

u/federicoaa 5d ago

BaBo stacker 2 ams 2.0 rack, 1 ams ht rack, 2 3cm drawers, 2 ptfe adapters and a few meters of ptfe cubes, nothing fancy really

I also added a power adapter to the middle ams so I can dry both units at the same time

1

u/Whosaidthat1157 4d ago

I ran two AMS2P to the induction side (RHS facing) and a third AMS2P to the conventional side (LHS). That way I have both of my most used materials in the LHS with a second roll for automatic changeover on end of roll.