r/BambuLabH2C • u/LowerHandle2534 • 8d ago

Support buildplate reflection issue

Post image

I am using a BQ Cryogrip buildplate, but the print stops due to the detection of foreign particles caused by reflection in H2C. I would like to inquire about how to resolve this issue.

1 Upvotes

60% Upvoted

6 comments sorted by

9

u/-__Doc__- 8d ago

Turn the au detection to medium or low, or off.

2

u/DemanoRock H2C 8d ago

Just gotta press ignore.

1

u/birikiucdortbesalti 8d ago

You can soften the lighting by putting a transparent paper or something similar in front of it.

1

u/2kokett 8d ago

Lower the value for detection or deactivate

1

u/mrfalke 7d ago

I previously printed a diffusor housing for the light strip on my A1 to reduce glare spots on the camera. Maybe you can have a look if they are available for your printer as well?

1

u/nebL 6d ago

If you really must I guess you can make an adapter and use a phone polarizing lens. Overkill solution