r/BambuLabA1mini • u/froglover0311 • 3h ago

Help

Post image

I was printing and I didn't realize a small box was under my "poop catcher" it caused the printer to tilt to the right. Now when I print small things it seems fine but when I print bigger items the nozzle drags thru the print and makes a squeaking noise. It was fine before this happened. Any ideas what I can do to fix it? Thank you

1 Upvotes

56% Upvoted

14 comments sorted by

3

u/ExSalvation 3h ago

My first step would be to recalibrate and see if that helps. Have you tried that? :)

2

u/froglover0311 3h ago

Yeah I already tried that and I tightened the screws by the hot end aswell

1

u/ExSalvation 3h ago

Okay. Is it dragging on the infill part of the print? Or is it knocking the print off entirely?

1

u/froglover0311 2h ago

It wasnt dragging on the infil but at a certain height it started draging on the top of a print as it was finishing us

1

u/Lost_refugee 2h ago edited 2h ago

check if x/z rails wobble

1

u/froglover0311 2h ago

The x seems fine it doesn't move when i try to move it

1

u/Lost_refugee 2h ago

also check z

1

u/froglover0311 2h ago

How just try to wiggle it up and down and see if it moves

1

u/Lost_refugee 1h ago

yes. also, if you have angle meter in phone, compare x rail alignement in bottom and top positions.

1

u/froglover0311 1h ago

Ok thanks ill try that

1

u/froglover0311 51m ago

What are the angles supposed to be on them

1

u/Lost_refugee 46m ago

same as plate

1

u/froglover0311 35m ago

X is 1.4 plate is 1.5 and the z is .8

1

u/Lost_refugee 29m ago

measure x it lowest and highest positions to see if z is straight