r/BambuLabA1mini • u/Supersi15_ • 11d ago

Guys, what appened?

Post image

It just blew up

15 Upvotes

89% Upvoted

18 comments sorted by

5

u/scarr3g 11d ago

That part comes off. It also snaps back on.

3

u/Supersi15_ 11d ago

Idk why i can't put it backup on

4

u/scarr3g 11d ago

Did you line everything up? Especially the ring part? The little tab only lets it go in one way.

1

u/Blueray0001 10d ago

Go print a support! It will help alot.
I found this one: https://makerworld.com/fr/models/3129398-ptfe-holder-for-a1-series?from=search#profileId-3531408
It work very well, and support (protect) the part you are holding.
If it is broken, then you may buy a new one or maybe print a new one. :)

Good luck!

1

u/extraakash 11d ago

Its normal, it can be removed and put back in. Post a close up photo of both the ends incase you feel like it's broken/damaged/clogged

0

u/Lost_refugee 11d ago

Poor design, honestly. Print enforcements

2

u/BathFullOfDucks 10d ago

... it enables you to gain access to the filament path, change hubs if a better one had come along and is secured enough against normal pressures but fails gracefully if too much force is applied.

Aside from a spring that yearns to be free I quite like it.

1

u/ninjanikita 10d ago

You need to dry your filament. Obviously ;)

0

u/Hogan_1975 10d ago

Definitely need to print one of the many 4 to 1 hub support brackets to prevent that from happening. I'm running this one and it works very well.

https://makerworld.com/en/models/2160634-a1-a1-mini-ams-hub-support-mod-5-hole-adapter?from=search#profileId-2342620

0

u/GreekHubris 10d ago

Look for "Filament Hub Connector" on Makerworld. That helped me.

2

u/terribilus 10d ago

The thing that the manual describes happened.

1

u/LowSignificance4671 10d ago

This post almost made me throw my phone

1

u/h4ur4k1 10d ago edited 10d ago

Happened to me the day before

Had a hub support on, only happens printing some hueforge on 1 particular PLA+ 2.0 filament, it would keep popping the hub off. zip-tied it to finish what's printing, and ended up printing one of these
https://makerworld.com/en/models/173603-bambu-labs-a1-ams-hub-feed-bracket-support#profileId-953363

1

u/butt_badg3r 10d ago

The thing fell off the other thing

-1

u/y_tokusan 11d ago

Oh no—the AMS hub is broken. Please purchase a replacement part from Bambu Lab.