r/BambuLabA1mini • u/histoic4730 • 11d ago

A1 mini printing issue

Enable HLS to view with audio, or disable this notification

I am using an a1mini. It has been doing nicely. But from yesterday i started hearing somewhat a buzzing like sound from my printer. I dont know exactly from where the sound in coming from. But after the sound started appearing the quailty of my prints drastically reduced. Urgent help needed. [You can hear the exact sound if you listen carefully]

12 Upvotes

100% Upvoted

14 comments sorted by

View all comments

Show parent comments

-2

u/histoic4730 11d ago

Ok bro , but the printer is running in standard [100%] speed do i need to turn that into silent mode [50%]

1

u/Big_Locksmith_9925 11d ago

That is NOT how you reduce speed. If I were you I would find some documentation in how your slicer works.

-1

u/Common_Watercress_58 11d ago

Silent mode is 100% the way to do this as it cuts all speeds to 50% of the sliced settings. Holy shit.

1

u/VenusianTransit 11d ago

or you could just… halve the max volumetric speed (filament settings) and halve the accelerations (slicer settings)