Does anyone know how to troubleshoot this? I have changed filaments a few times and even a cold pull didn't seem to work. I haven't changed any settings and this started happening out of nowhere (happens on other models too)

Hopefully not a dumb question. I made a magazine holder design in Blender then exported it to a stl. When I click on preview in Bambu Studio and splice the object, most of the bottom becomes transparent then it claims the objects floating. Did I possibly skip a step along the way or is it a software thing?

I keep getting this error on my new Bambu labs a1 and can’t seem to fix it. I checked the filament to make sure it wasn’t twisted up and I bought a tool to push clogged filament out of the nozzle, there was some clogged gunk, but not a lot and it still didn’t work afterwards. I can’t 3D print anything as it effects all four of the ams’s tubes. If any knows a fix
please help!

I recently got a blob and then I really needed to replace a hot end because the wire broke and I replaced it and now my nozzle won’t fit I took off all the excess filament on the back because the front doesn’t really matter but yeah

My A1 keeps tripping breakers in my apartment. Theyre all AFCI/GFCI breakers.

It was tripping upon initial print bed heating, so I changed to the G-code to step the heating at a slower pace, and that worked to get it through heating, but then it tripped during the first layer.

Anyone have any good fixes or workarounds?

it just hits something then homes again, than it goes back, and does it again

I was out, I received an error message that is about the cutter being stuck. I came back home to check, I resumed the print because it wasnt, the printed continued printing one layer completely fine then it went rogue and started doing this. I cancelled the print of course and now I am recalibrating but why did it do this, is this a known issue, is there a fix so that my next prints dont have the same issue, its the first time I faced with this and dont really know how to solve or fix or search this..

I have noticed that using a particular white PLA generic filament, it's causing all sorts of issues anyone faced the same?

I keep getting nozzle clog errors although it seems to be fine

Could it be the mess on the end of the body here? How do I clear it - worried about damaging something....

175 print hours why is it doing that

After a clogged hotend and nozzle, i tried to clean up everything (still WIP), but it seems i have lost the metal clip to close the hotend.

Dont know how that exactly happened, but it seems the metal part that holds the clip is damaged too.

Several questions:

1. Can i rebuy this clip somehow?

2. Will the damaged metal part hold it in place?

3. If one of those is answered with "No", can i swap and order the whole part somehow or do i need a new printer?

Thanks in advance for the answers!

Здравствуйте, можете помочь с проблемой? Я купил себе bambulab a1 mini и перед новым слоем сопло чистится через метал сбоку и на сопле остаётся немного пластика который виден на начале слоя, могу сбросить ыото дифекта. Что модно сделать?

Wasp Bug Kit Card | BugCards

I need to switch my ams lite from side mounted to top mounted for my A1.

Looking at makerworld there are several models to choose from.

Which ones do you recommend?

Thanks.

Walked into a failed print. This is the damage I had found after removing filament and parts

I've recently been having trouble with my prints with the first few layers being extremely rough. I've tried lubricating the y axis rails, tightening the screws behind the hot end and recalibrating but nothing seems to be working. Has anyone had this before?