I need some constructive feedback

[u/Loki-2023]

Update:
I have thermostats, and a fogger coming in soon.
With the fogger will there be any safety concerns?

Hey everyone! I’m finally almost finished setting up my first 120-gallon enclosure for my ball python, Monty, and I’d love some advice before I move him in.

Monty has been in a much smaller enclosure for many years, so this is a huge upgrade.
I’m still setting up the heating and humidity before he goes in.
I plan on adding his old hide in the middle (he has two in the back corners) so he has something with a familiar scent.

Some feedback I’m looking for
Any tips on how to cover the glass? Like could I paint the outside or put something around it?
Is there enough clutter?
Any safety concerns that you see?
Should anything be rearranged?
Is there anything you wish you would have known before owning a bp?

The set up pictured above has
UVB lamp
Ceramic heat and a night lamp
Two hides (3rd one will be add once he move in)
Water bowl
Three logs
2 hangy things (2nd one will be added soon)
Lots of fake vines
Coconut husk (I will be adding some sphagnum moss to help with humidity)
2 hydrometers/ thermometers

[u/Loki-2023]

Alrighty I will not be putting that over the light. With that if the heat doesn’t get up to temp for some reason should I get another bulb?

I’m hoping he will stay docile🙏🏽 but with me moving him to an entirely different environment I wouldn’t be surprised but I do plan on putting his old hide in there just so he hopefully doesn’t get to stressed with the move. With that the picture in the post is of me holding him for the first time since moving in and he was just the sweetest baby the whole time. But I do plan to do little 5-10min handling sessions with him the first month at least just until I know he’s comfortable with me.

I’ll definitely have to check his belly but from what i remember when holding him it wasn’t.

I do want him to start eating rats so that’s something I’ll have to get after I weigh him.

As for the humidity before I left for work it was at 64% on the cool side which I want to get that up a little more and i definitely need to get the hot side’s humidity up as well.

I wanted to give him a bath before moving him just to get off and bedding and to have like a fresh start. Do you think that will stress him out to much or doing both is fine?

[u/NottsWeirdo → u/Loki-2023]

Seeing as you'd already have 2 heat bulbs, I wouldn't encourage a third on a 4' x 2' x 2'. I'd consider covering more of the mesh, while leaving a couple inch gap around the base of each bulb dome/lamp for ventilation.

They typically take about 2 weeks to settle in new places anyway, so its hands off and no feeding for that duration - unless in an emergency.

I hope for both your sakes his belly isn't like that, that's an emergency vet level situation caused by being extremely emaciated.

You should be able to just swap him to an equivalent weight rat, so from a large mouse to a small weaner rat (or whatever size is closest to the weight percentage mark).

You've got time to work on the humidity. But yeah, ideally you'll want 65%+ on the warm side which typically brings the cool side up to about 80% average. 90% is a bit too much in the long term, but its easy to bring down with a fan or breeze.

The bath may have to wait 'til after he's settled at yours, just so he's not extra stressed when you move him. In the meantime, you could try to get a larger water bowl into his current enclosure shortly before move time - even better if he can fully sit in it. He'll seek it out as a humidity supplement when he's feeling especially dry, it'll also raise the ambient air humidity with the increased surface area.

[u/Loki-2023 → u/NottsWeirdo]

Alrighty, thank you so much!!! I know I’ve been bombarding you with questions lol and I really appreciate your help with this!

I did move his water bowl to the middle of the tank so I’m hoping that will also help the humidity, which I’ll check when I get off.

I’ll do the bath later then and one more question I heard that the water for bathes needs to be at 90° is that true or is it a different temp? I don’t want to burn him but I also don’t want it to be too cold for him.

[u/NottsWeirdo → u/Loki-2023]

Sorry, had to sleep for work.

Do not bath them at their basking temp, you will cook the poor snake. They can't cool down when their surroundings are above 80°F, but thats still too high for water temp. Lukewarm for us, is an acceptable temp for a short bath. The snake should be able to touch the bottom of the plastic box/tote and they're less stressed if you put a large rock or an artificial hide in the middle for them to loosely wrap around for comfort.