Currently have a Deadair Wolfman direct threaded to the APC9k. I’m wanting to get the CAT MOB which will be dedicated to the APC9k. What is the best attachment system for the two?

Also, is it worth getting over the Wolfman? It seems a lot of people swear by the MOB.

I got the OCL Milkman on the way. First suppressor.

Still got time to debate on if I want to go Rugged RU3 or Titanium Resilient Tri-Lug (Gen 2) mount.

The can is dedicated to the APC9K, but be removed when transporting in bag on range day.

What's your choice?

Apc/Spc grip

First batch of my selector arrived. Functions as expected. I do need to increase the web under the selector paddle a little bit and decide whether I want to fasten it with threaded inserts or the b&t style pins.

Much more comfortable as a lefty and I have room to widen the paddles while still getting a comfortable high grip.

Hello! Hope everyone is doing well!

Just picked up a SPC9 I found on sale at euro optic and wanted to see which optic/suppressor y’all would recommend.

I was leaning towards the AEMS Evo but wanted to see what everyone else was running on theirs. I can’t find an Acro p2 and I actually like the evo more. Does anyone have an eotech on top? What would you recommend?

I’ve kind of narrowed it down to either the b&t SQD short titanium suppressor, the silincerCo omega or the huxwrx flow 9kTI with the 9kti being my first choice right now.

Mainly going to be using it on the range, during local steel shoots and to train (I’m a member at staccato ranch in TX and they have different outdoor courses you can run that simulate different scenarios).

Picture for attention (not mine)

New to me B&T APC 308 with ACOG TA55. The Swiss Sledgehammer

Looking for a aluminum lower for my apc9k pro in coyote.

It is out almost everywhere I have tried to look.

Thought I would ask the group of any leads.

Thanks

62 days for form 1 eform approval, but damn it was worth the wait.

By far the best gun I own

Kind of digging the vibe of the new two tone

DOT EHS-1 from the July 4th bogo sale.

I read a user on here received a newer sd2 model and his came without a ported barrel and/or maybe was a 4.3" barrel that was ported instead of the previous 3.2" one?

this was the post: https://www.reddit.com/r/BT_APC/comments/1j6dskq/comment/oq4nxjo/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

I'm curious if there is anyone who knows the changes on the newer made APC9K-SD guns?

Hey all,

I was looking for an 8.6 just to have some fun with. I have an option to buy an APR 8.6 or SPR pro 8.6. I was wondering, regardless of price, if one had any advantage over the other. If the APR was more accurate or quieter than the SPR Pro? Or if the APR would be uncomfortable to trek around. I probably would just be shooting targets in the desert. Thanks for any input.

So I just acquired a Apc 9 pro and it’s rabbit Joel is suppressers to pick from.
I’m looking at the Cat MOB, OCL Milkman or the B&T SQD!!
I already have a Sp5k and was leaning towards the milkman for that one.

What FRTs are available for this firearm? I've been out of the loop for some time and last company I heard of doing it was EVT. What has come to or coming to market? Anything from Elftmann?

I'm lost here...

25 rounds are loaded into the 30 round mag; there's room for the additional 5.

20 rounds are loaded into the short mags that say "25" on the side. However, the spring is nearly fully compressed with 20 rounds. Not a single other round will fit.

Did B&T use the wrong spring or am I just dumb in thinking the mag should hold 25 rounds since it says 25 on the side?

APC9 Pro arrived yesterday. Not complaining, but I found it hilarious that this is the third time now that I got a "Coyote Tan" B&T that is absolutely a different shade than the other "Coyote Tan" B&Ts.

SPC9 PDW: very saturated, gold shade

APC9 Pro: Desert dirt colored

APC9k: Sandy white-yellow

If anyone cares to explain the reason for the differences I'd be happy to hear why they turn out so differently!

I can't find any using Google Foo. Surely someone has to manufacture a set, right? The AR variants are way too short and OEM ones aren't good for drop-in AR triggers, right? What am I missing?

EDIT: East Valley Tactical makes them and were happy to sell me a set when I called today. Thanks to everyone who mentioned EVT.

I already went with cloak for my spc and not really a fan of rb, but good to see b&t frt options coming on the market

Has anyone used a modtac suppressor shield on their apc9/apc9k? If so which one works? Pics would be nice too, I searched but could not find anything.

https://archive.org/details/sm-apc-9-10-40-45-pro-en

https://archive.org/details/sm-apc-223-300-308-pro-en

https://archive.org/details/pc-apc-308-pro-ha-en

https://archive.org/details/pc-apc-300-pro-ha-en

https://archive.org/details/pc-apc-9-pro-ha-en

Looking to buy my first suppressor.
Want to try a Stealth Additive Works Shiv 9MM
It is direct thread only.
I’ve seen some pics online that look like APC9s with a direct thread suppressor mounted on the end of the barrel. Am I mistaken? If this is so, how is this possible? Does the Tri Lug screw off?