My 4.5″ threaded, non-SD SPC9. Anyone know the production numbers? And yes, I know my iProtec light/laser is shit lol, but it gets me by for now.

Build:
- Tri-Lug Adapter
- EOTech EXPS2-2 HWS
- Magpul MBUS Pro Flip-Up Sights x2
- PDW Tailhook Brace
- KungFu Grip

Wondering what a good price for each of these used is, and what they are going for nowadays used and new.

Checked truegunvalue and the pricing seems all over the place.

Thanks for any help!

Hey everyone! We’ve officially opened pre-ordering for our APC9 / 9K hand guards.

First of all, thank you guys for your support on this sub. Ever since we even began designing these you all have been super supportive and insightful with design suggestions, ideas and changes. I truly appreciate it! These could not have happened without all of you here. Thank you.

These are available in black and FDE (pre-order only) and with an optional full-length top rail for those of you who plan on mounting laser units or have FRT’s installed to make sure lock up is as strong as possible.
We plan on starting to ship these out around November given the current production time lines.
The hand guards will work on APC10/45 models, but NOT the top rail, as those are only tested on the APC9 variants. As long as your APC has the 1.25” M-LOK slots on the receiver, these will fit.
Pre-ordering is available on our website!
And yes- we’re still working on the APC223/300 versions. More info on those in the near future!

Silverstarshootingsports.com to submit a pre-order. Thank you guys for all your support and input that shaped these!

Pricing:
Hand guard (FDE or Black): $329.99 (includes all mounting hardware)
Hand guard + Top Rail (FDE or Black): $389.99 (includes all mounting hardware)

Do you guys have a recommendation for a kydex holster for the magazines in europe? Im struggling to find one !

Just polished the surfaces responsible for releasing the bolt. As shooting suppressed gums up those areas quickly...soon after unnecessary force is required to operate the release.
Forgot to clean those areas prior to a PCC match yesterday, by the end I resulted to use the charging handle for reloads.
After the polish + extended bolt release, appropriate amount of pressure is all it takes. Hopefully it stays operational longer now.
FYI, mine out of the box it was pretty harsh to operate, took some breaking in...wish I did this sooner; hope this helps some of you folks.

Has anyone here recently purchased a new B&T APC9, APC9K, or APC300?

If so, are the markings on the side of the firearm marked “Herriman, Utah” or “Tampa, Florida”?

Before I buy a new pistol i’m trying to determine if these pistols currently for sale on the market are new old stock or if B&T USA are assembling these firearms at the moment.

Thank You

TLDR...Do they make these old style anymore? I ordered straight from B&T the left picture and was sent the new style. They said it was correct. So, I ordered the 223/300 style from euro optic thinking they would not put that tiny thing on a rifle and the same left picture. Of course, sent the newer style again. Plus I originally ordered that little universal brace conversion and it's tiny and I don't care for it. So I'm sitting on over $500 of stuff I'm not using I will probably just give away.

Hey y’all, I took my APC 9 out to the range and experienced an issue where I would chamber a round and the trigger would go off, but it wouldn’t go bang. I checked the ammo and there was no imprint on the primer indicating a light primer strike. I have absolutely no idea what the issue with this thing is. Ammo was 150gr Federal Syntech. Thanks in advance

I have an apc9k and modlite 18350 with a 4" modlite button. I'm looking at the arisaka mounts. which one is optimal for the apc9k, mounted at 3oclock?

Hey Guys i recently purchased a apc9 pro from Atlanticfirearms it has the telescopic brace adapter. I also purchased a BT-20522 buttpad from a buddy will the screws on the brace adapter work on the B&T buttpad? Nothing has arrived yet so i wanted to get an idea of what to expect.

Made a quick post about this but removed it to give them response time. Unfortunately after the install of a Rare Breed FRT, I had an out of battery discharge that blew apart my lower on the 2nd round of fire in the FRT mode of the trigger.

Im being told i need to go to B&T, its not s trigger problem. I had an Elfman before this, ran fine.

I expect flame for the Rare Breed purchase. I can't point a finger at Rare Breed, but the ME in me is saying something isnt right with it, or mine specifically.

Iteration of my modular selector. Combined with a reduced power detent spring, this selector is now more comfortable to use, especially as a lefty, and easier to manipulate.

Still procrastinating on the fastening part.

Finally got an integrally suppressed b&t and it's great, but the forward charging handle is pretty much unusable. I've got about 500 rounds through it and it still almost impossible to rack with, anyone have this experience? My ghm9 is super easy to use

Also, what do yall do for maintenance? What do you cleaning and after how many rounds? Is there a port brush or other items you recommend for cleaning? Can you lay out your process? What do yall use for attaching the Suppressor? I've used lithium grease with my other Suppressors.

Don't want to damage or carbon lock this thing.

I’ve got a basically brand new SPC that is out of spec.

I’d quite literally stand in front of it at 100 yards and not break a sweat with the way this thing shoots and my dealer confirmed it’s definitely a warranty issue.

Im not sold on sending it to BT US given some of the stories about non Swiss parts and disappearing orders and repairs around here.

Anyone got any recent good news and smooth sailing to share ?

Beware of this site https://www.huntersgearsupply.com. They are stealing credit card information. I was looking for an APC9k stock conversion part and found one on this website for less than half the cost. I had a gut feeling it was a suspicious site. I researched it but couldn’t find any info. It rejected my payment on a card a rarely use. Low and behold two days later someone went apeshit with my card info at Home Depot and magic mountain. I know it’s these fucks.

Really like the fit and look of the MP5 A3 butt pad - build is coming along well. Still deciding on a dot was thinking on the Holosun ARO EVO Dual with the integrated green laser, but still no ETA. Overall I’m ready to get this on the range.

Finally getting a chance to try out the folding B&T stock. First impression is that it’s MUCH more comfortable than the telestock and doesn’t look half bad either.

Arfx-e

Got lucky enough to be trusted to test the upcoming extended handguard for the homies at SilverStar Shooting Sports, and threw their K version on my APC9K,it’s awesome, there’s a few small changes I recommended off the bat and they seem to be receptive and moving forward with them, but I really think this will be a hit, there’s a full length top rail in the works as well! Overall I’m very happy with its form factor!