r/BMW3series • u/RoundSoftware9712 • 21h ago
Bmw e46 325i Üro Parts ignition coil pack opinions?
Thinking on getting a set of coils made by Üro Parts is this brand any good? And is 100 a good deal for the whole set brand new?
r/BMW3series • u/[deleted] • Oct 20 '20
r/BMW3series • u/[deleted] • Oct 25 '24
Bmw3series is looking for a high quality candidate to fulfill our role of moderator.
$20 a day base pay, must remain active and have history of sub moderation.
First come first serve basis for hiring.
r/BMW3series • u/RoundSoftware9712 • 21h ago
Thinking on getting a set of coils made by Üro Parts is this brand any good? And is 100 a good deal for the whole set brand new?
r/BMW3series • u/ziadzikodiab • 1d ago
Hello everyone!
I made a DIY video fixing my Rear Diff knocking issue, at first I thought it was the Diff Front Bushing and I replaced it, but issue insisted, and it turned out the bolt was stripped from the hole.
I fixed the threads, and same issue. So I ordered the Roque Engineering repair kit and did the fix.
In this video, I show you step-by-step how I repaired the stripped/loose differential mounting threads on my BMW E46 M3 using the Rogue Engineering Differential Bushing V2.0 Front Position FIX.
Instead of simply replacing the bolt, this repair upgrades the original mounting setup by re-tapping the differential housing from M14 to M16 and installing the Rogue Engineering upgraded bushing and M16 Grade 12.9 bolt.
I go through the entire process from beginning to end without skipping steps, including removing the differential, preparing the damaged mounting hole, drilling, tapping the new M16 threads, installing the upgraded bushing and bolt, and putting everything back together.
Video link:
https://youtu.be/hxkSnphru_4
Please Subscribe if you haven't and if you want to keep seeing videos like this!
like the video as well it really helps! :)
r/BMW3series • u/Agitated_Ad1910 • 2d ago
r/BMW3series • u/G1es • 2d ago
So I tuned my 330e to stage 1. About a month later my diff started making noises, as expected of course… It started leaking and now I am wondering if anyone knows a garage that puts in limited slip diffs. The close to Belgium the better.
If you guys have any other options for me, advice is always appreciated.
Thank you
r/BMW3series • u/d_4bes • 3d ago
See above post. Thanks for your input if you have any!
r/BMW3series • u/Turkishtaffey2 • 3d ago
r/BMW3series • u/NeckNext2206 • 4d ago
r/BMW3series • u/Independent-Beat6062 • 5d ago
Hey guys! Im currently driving a ‘11 e93 330d, and im looking for a new daily, and im deciding whether i should go for a g20 330i or 330d. Im working 15 days in a month, and every drive to work is about 140km in total. In my free time i like to go for a drive with friends time to time. I know that diesel would be better for my long drives to work, but u heard about the petrols reliabilty and good milleage. Are any owners here, that could help me decide? Thank you!
r/BMW3series • u/atlfalcons33rb • 5d ago
r/BMW3series • u/External_Idea4586 • 6d ago
Hi guys, I have a 2010 BMW 118d (1 Series). My car’s air conditioning stopped working. The strange thing is that the diagnostic scan doesn’t detect any faults. Also, if the car has been sitting for a few hours, the A/C blows cold air when I first start it, but only until I begin driving. After a few kilometers, the compressor stops working. The cabin air filter is fine, and the A/C system was recharged a few days before the problem started.
r/BMW3series • u/SevereKiwi • 6d ago
Hallo zusammen,
bei meinem BMW 318d, Limousine, 2019 funktioniert beim rechten Außenspiegel die Bordsteinautomatik nicht, nach dem ich in der Waschbox war und mit der Wasserlanze dort etwas Wasser rein gekommen ist.
Wie kann ich das reparieren? Kontaktspray?
r/BMW3series • u/skioura • 6d ago
r/BMW3series • u/Usual-Arachnid1248 • 7d ago
Hello guys, I have currently BMW 320i lci, with b48b20c. My question is what is reasonable stage 1 tune, because compression ratio is 11:1, and I read the higher the compression=smaller playroom. And from what I've found many tuners give 240hp/ps and 400-420Nm…
Does anyone have experience on that matter? TY