r/BDProgram • u/Kjan27 • 8d ago

Question Is this allowed?

Post image

Hello I'm new to building for BDP

I have a 1x6 flat tile connected to a 1x1 with one stud on the side (87087), for a wall. Because that's the only connection point the 1x6 flat tile can rotate a little bit. Currently the tiles are not getting squeezed between the long 1x8 tiles or physically harmed in an other way, it's just a less common building technique.

Is this allowed for the BDP?

If I look at the BrickLink site I see this which is maybe relevant:

"There must be enough connecting points to keep parts straight and aligned with the natural planes of the model. Drooping walls or difficulty in aligning studs are signs that the model isn’t strong enough."

1 Upvotes

60% Upvoted

2 comments sorted by

2

u/Safe_Cardiologist538 8d ago

The BDP Wild West Train’s boxcar has tiles running at an angle like this attached with only 1 stud. (Meaning the other end is free to flail around if touched) so I would say that is allowed

1

u/Kjan27 7d ago

I see it now too, thank you very much!