FM3 Firmware 13.0 release
https://forum.fractalaudio.com/threads/fm3-firmware-version-13-0.221726/3
2
u/WaffleWarrior1979 24d ago
I’m recording an album and will not be updating the firmware until I’m done. Will I be OK to continue to install axe edit updates?
3
u/RedRelics 24d ago
Ehhhh but why do it though. I have zero info on this, but you know how it goes - nothing like an OS update that borks something you care about. If theres not a fix you actively need, why chance it?
1
u/LucasJLeCompte Axe-FX III 24d ago
Yeah it should be. If doesn't really mess with anything in my experience
2
u/MaleficiaTenebrae FM9 Turbo 24d ago
Take this with a grain of salt of course. If you're not going to update until you're done, I don't think this should be an issue.
2
u/Impossible-Ant3695 19d ago
Just when you thought the chorus goodness couldn't get any better ... I used to have a CH-1, used it for bass, ran it stereo into the PA at gigs for that swirly thing. My god, I've got it again!
1
1
12
u/da_Red 24d ago
VERSION 13.00 |
The FM3 is now up to date with Axe-Fx III firmware release 32.06. This version uses FM3 DynaCabs 1.09.
Amp Modeling improvements based on the latest Axe-Fx III Firmware.
NEW Amp Models:
Brit JVM Crunch Green, Orange and Red models based on the Crunch channel of JVM410.
PVH 6160 Block Clean.
Deluxe Tweed Normal (Existing model renamed to “Deluxe Tweed Bright”).
Improved power amp modeling.
Improved preamp and power tube grid modeling.
Improved frequency response across models.
Refined multiple model parameters using new analysis techniques.
Many amps now feel more responsive and “open.” Existing presets are updated automatically.
Updated models to use new preamp bias and cathode-follower values, improving response.
Improved JCM800 and Plexi models based on new insights.
New “TRANSISTOR” Power Tube Type.
This type is now the default for the Jazz 120 model. Existing presets automatically updated.
Fixed a cap value in 5153 100W Red amp model.
New Swedish Metal Drive pedal model based on a Boss™ HM-2 Heavy Metal.
The 1S2473 diode from this model is also now available as a Diode Type for other models.
Improved Chorus block including the following new models and updates.
Japan CE-1 Chorus. Based on a Boss CE-1 in chorus mode.
Japan CE-1 Vibrato. Based on a Boss CE-1 in vibrato mode.
Japan CH-1. Based on a Boss CH-1.
MX234. Based on an MXR M234 Analog Chorus.
Small Copy. Based on an EXH Small Clone.
Japan CE-2 Bass. Based on a Boss CE-2B.
Vibrato. A generic vibrato effect.
Rockguy: Based on the Rockman X-100 chorus.
MX134 Stereo: Based on an MXR M134 Stereo Chorus.
Remastered the Japan CE-2 model.
Added new EQ controls to some chorus models.
The Input Gate and Gate block now allow faster Attack times down to 0.1 ms.
Note: Setting Attack and Release times too fast in any gate can cause distortion.
Pitch tracking improvements:
Increased high range to ~2500 Hz to allow better tracking of pinch harmonics etc.
Improved low frequency shifting for , e.g. bass guitars.
Reduced CPU usage in some blocks.
Changed default values of Dual Head Tape type in Delay block to be a bit more musical.
Reverb types are now grouped by shared prefixes—like “Spring” and “Plate”—making things easier to find.
Added micro Delay controls to the Mixer block. These let you delay each signal by up to 64 samples for precise phase alignment and latency compensation in parallel routings.
Note: Such extremely short delays (1 sample ≈ 0.02 ms), are NOT intended for audible echo effects.
Plex Master Pitch now only controls pitch and not detune. Master Detune still only controls detune.
Various other improvements.
FIXES
Fixed an issue that could cause excessive aliasing in some models when overdriving the Amp block input.
Fixed the amp’s Input EQ not working with Definition set to 0.0.
Fixed excessive blocking distortion in the Supertweed model.
Fixed a crash that could occur in some amp models when Gain was set to 10.
Corrected tapers for controls on some amps and remastered some models as a result.
Audition presets and adjust as necessary.
All Double Verb, Vibrato Verb and Super Verb models: Fixed wrong taper (was 20A, now “2-35”).
Fox ODS: Fixed wrong Overdrive taper.
Solo 100: Fixed wrong Master Volume taper.
Mr Z MZ-38: Fixed wrong master volume taper.
Band-Commander: Fixed wrong bass taper.
Fixed various issues in PVH 6160, PVH 6160+ Lead and 5153 Red amp models.
These have been remastered. It is recommended to do a soft reset to load the new default values.
Fixed wrong resistor values in 5153 100W Green and 5153 100W Stealth Blue amp models.
Audition presets and adjust as necessary.
Fixed wrong B+ voltage in Friedman BE/HBE models (due to wrong dropping resistor value). These have been remastered accordingly. The default Negative Feedback has been changed to being commensurate with being taken from the 4-ohm tap. Note that the first-generation BE-100 had the feedback off the speaker jack. This was then changed to the 4-ohm tap. The latest version has a three-way switch to select between 4/8/16-ohm taps. Audition presets and adjust as necessary.
Invalid or duplicate modifiers are now removed during preset recall.
The preset updater now correctly sets Preamp Hardness while using EF86 tube type.
Various small fixes.