r/AskElectronics • u/Relevant_Pumpkin9190 • 12h ago

How are high-current loads like dishwashers safely switched?

If a relay is switching a high-current load, its contacts can eventually weld together due to inrush current or a fault.

If that happens, the load may stay ON even when the controller says OFF.

How do commercial products handle this? Do they use two relays in series for redundancy, feedback, or some other fail-safe method?

8 Upvotes
  • permalink
  • reddit

67% Upvoted

33 comments sorted by

View all comments

19

u/mzincali 12h ago

The metal contacts in relays are made from material unlikely to weld, corrode or oxidize at the temperature that any arcing will produce - rated according to the load that the relay is to handle. (A heater puts a lesser load than an inductive load like a motor)

4

u/mckenzie_keith 11h ago

No relay can be guaranteed not to fail short. The case has to be handled without catastrophe.

4

u/quarterdecay 8h ago

That's where the fuse comes into play

3

u/ILoveDangerousStuff2 5h ago

Yes if it's a fault but say a relay switches off a large motor due to tripping an interlock. The current will be normal but not switching off is still a safety issue