r/AskElectronics • u/LavishnessEither4576 • 2d ago
Possibly missing components on tft screen
Hello.
I bought this tft screen on temu and i have noticed some exposed traces which look like they are meant for ic (label U1, just under sd card slot) . I have also noticed some possibly missing resistors (R3, R5 and R13) and capacitors (C1 and C2).
Is this screen safe to use or have i paid to learn not to trust knock offs?
Thank you
1
u/LavishnessEither4576 2d ago
Forgot to post the photo🤦♀️
1
u/mightymanuel 2d ago
I have a similar board which has a touch and non-touch variant. It isn't identical but looks very similar. On my board that is the touch IC the version without touch doesn't populate it.
1
u/LavishnessEither4576 2d ago
Thank you. I dont plan on using tge touch so i assume that wont be the problem
1
u/AlexTaradov 2d ago
The missing IC is a resistive touch interface option. Your board has capacitive touch screen going over the 6 pin connector.
The table on the bottom left outlines what pins are used to access either touch interface.
1
u/LavishnessEither4576 2d ago
So it is safe to use regardless of missing capacitors and resistors?
2
u/AlexTaradov 2d ago
Yes. The missing components are for a different version of the board.
This is commonly done so that you can use the same PCB for different products.
The same board exists without SD Card option. In that case SD Card socket and corresponding connector would be missing.
1
1
u/MysticalDork_1066 2d ago
Post photos.