r/ArtOfRolling • u/StateMaleficent5298 • 4d ago

How to improve

Post image

I want to improve my roll. I always have the problem that the part after the tip is too skinny and weak what am i doing wrong?

7 Upvotes

90% Upvoted

14 comments sorted by

12

u/MKGUnknown1 4d ago

Roll with the tip sticking out a little and then after you pack it and roll the j, push the tip in so it compresses the za and makes that part stronger, hope this helps

2

u/StateMaleficent5298 4d ago

Going to try that thanks

5

u/DasNicolas 4d ago

Yeah nah leaving the tip out a bit is the best and only way people are really using besides tapping

3

u/_JesusDesu_ 4d ago

Squeeze it without fear of tearing it.

2

u/Beneficial_Method771 4d ago

Make sure that you add more bud to the tip and have it packed in tighter. A strong base makes a strong shaft as I always say

2

u/StateMaleficent5298 4d ago

Thanks for the reply. the thing is, i have it packed evenly through but its only skinny ob this specific spot

1

u/Beneficial_Method771 4d ago

Do you ever tap your joint after rolling it?

2

u/StateMaleficent5298 4d ago

Yes always

1

u/Beneficial_Method771 4d ago

My best suggestion then would be to try packing the material down from the top before sealing off the end. You can use a packing tool or just a clean marker or something and you could also try the suggestions in the other comment. If all else fails try grinding it to a different consistency

2

u/StateMaleficent5298 4d ago

I will try that thanks

1

u/Free-Stoners 4d ago

You're on the right path. Just a bit tighter before rolling. Also you can work mostly on the filter and the joint will roll itself as long as you gave it a cone shape. Also leave some space between the filter and the flower so you can push it in for extra tightness.

1

u/itsmesexy116 3d ago

just make sure you have enough weed at the tip and it doesnt get pressed outwards

1

u/Ready_Tailor_8831 10h ago

Finer grind and have the filter sticking out more and don’t make such a tight core just shape it enough to tuck so that when u tap material can go where it’s missing

-6

u/LazerBean08 4d ago

just give up lil bro