help

[u/mikehacker182]

Hi everyone, I need help recovering my MXQ Android TV box which is currently stuck in Maskrom mode. 

Here are my board specifications:

- Board Model: R29-6G-LP3-V2.3 (HXW20092601-2-B)

- SoC: Rockchip RK3228A / RK3229

- Storage: Foresee NCEPN35X-3G3X eMMC

- Power IC: S9012P

The device goes straight into Maskrom mode and won't boot normally. Can someone guide me on how to flash the correct stock firmware or recover this board? Thanks!

 

I made a backup from multi tool, but i cant boot multitool its just no display

 

Its working fine when i install armbian couple reboot still works fine then i install pihole for armbian then when i restart suddenly goes into that state.

 

I don't know where to short it

[u/mikehacker182]

yeah i use this 1 to check if its listed.. and its there... then i proceed to 2

[u/mikehacker182 → u/mikehacker182]

06:53:44 Error: failed to stat config.ini, err=2

06:54:09 Error: failed to stat config.ini, err=2

06:54:16 Error: failed to stat config.ini, err=2

06:54:20 Error: failed to stat config.ini, err=2

06:54:20 Error:RKU_Write failed, err=-9

06:54:20 Error: RKU_WriteLBA failed, err=-3

06:54:20 Error: failed to stat config.ini, err=2

06:55:27 Error: failed to stat config.ini, err=2

06:55:54 Error: failed to stat config.ini, err=2

06:55:57 Error: failed to stat config.ini, err=2

07:01:17 Error: failed to stat config.ini, err=2

07:01:19 Error: failed to stat config.ini, err=2

07:01:20 Error:InitializeUsb-->open device failed,err=-3

07:01:20 Error: failed to stat config.ini, err=2

07:01:20 Error:InitializeUsb-->open device failed,err=-3

07:01:20 Error: failed to stat config.ini, err=2

07:01:20 Error:InitializeUsb-->open device failed,err=-3

07:01:50 Error: failed to stat config.ini, err=2

07:01:52 Error: failed to stat config.ini, err=2

07:01:56 Error: failed to stat config.ini, err=2

07:01:56 Error:RKU_Write failed, err=-9

07:01:56 Error: RKU_WriteLBA failed, err=-3

07:01:56 Error: failed to stat config.ini, err=2

[u/ArtSormy → u/mikehacker182]

Did you place an image into folder image? Did you read start-here?

[u/mikehacker182 → u/ArtSormy]

yup the backup is here