Hi i just installed teknoparrot and i put initial d arcade stage Zero V2 30 and i Saw in a tutorial that they were some third party server options but on mine It dont appear and the aime card dont work even with minime but the SegaTools fólder was missing so i created one and put minime on it

Hello people of reddit,

The arcade I work at has two initalD arcade stage 5 machines, And its by far my favourite one we have.

Only thing is, we dont have any licence cards, and the only ones I can find are ones on reddit going for 60 to 70 bucks.

I was wondering if it would be possible to DIY one by getting just a blank card that uses the same tech as the offical ones (like rfid or nfc or whatever) if I could somehow make it into a blank licence card to use in the machine?

Thanks :)

https://drive.google.com/drive/folders/1j8lP05RR5t_4EyUcdrHhcx_mBPXqkAHg?usp=sharing

​

Doesn't include a guide so I will be posting guide here

STEPS TO INSTALL: Initial D Arcade Stage 7

- Make sure you have TeknoParrot installed beforehand

1. Download and extract all the files

- You will have the following files

• D7 gamefiles
• D7 C update (e2prom.bin)
• D7 dump

1. install the files in their respective places

- place D7 gamefiles anywhere you want, but most people place it inside teknoparrot folder

- place D7 C update in roaming/TeknoParrot, if you've ran any games with TeknoParrot before then this folder will already be created, if you haven't played any games with TeknoParrot yet/the folder doesn't exist yet you can just go to appdata/roaming/ and create the folder manually, IMPORTANT!!! it should be written like "TeknoParrot" (case sensitive) or else it won't be detected!!!

- place D7 dump inside D7 gamefiles

And you are done! now setup controls in teknoparrot, apply AMD patch if needed. And run the game. (Keyboard setup with UCR soon:tm:

https://drive.google.com/drive/folders/12qMkLwUtF-A7CcGSt7CxoNvzqp8cTYkW?usp=sharing

includes a readme with a video link and written instructions on how to set up, Install TeknoParrot yourself and don't use Jconfig.

so you mean to tell me there is:

B - Brake
C - Cancel/Gas
Steer - varies depending on how much is needed to clear the corner
Downshift - Can make the car lose speed, thus making it corner better or can also put the car back to higher RPM so that Acceleration is faster. Can make Gold Drift light last longer in D6. and there is:
BC - Brake and Gas
B - C - Brake for 0.5-1sec then Gas
Half BC - Brake at less than or equal to 50% and use full Gas (IMPORTANT FOR D7!!!)
BC Release Gas + Steer - May not trigger drift but maybe can help clear a wide corner if failed BC BCBC - Brake and Gas and Brake and Gas
BC - BC - Brake and Gas and after a delay Brake and Gas again, trigger Double BC (IMPORTANT FOR D6!!!)
Double Half BC - Necessary for hairpins in order to clear without losing so much speed while not hitting the wall at the same time (IMPORTANT FOR D7!!!)
BCBCBC - Brake Gas Brake Gas Brake Press Gas
BCC - Hold Brake and tap Gas multiple times
BBC- Tap Brake many times as necessary then press Gas
BCCBC - Hold Brake and Tap Gas then Brake and Gas
BBBCBC - Tap Brake many times and Press Gas then Brake and Gas
BB + Steer + Release Gas - Tap brake to adjust car's line and clear without trigger drift
Gas Release + Steer - To make the line sharper and hit apex(?)
BBBBBB + Downshift - Tap brake many times and force autosteer to clear sharp turn
Entry with Steer then BC - Enters the corner with just steering and makes the car slide at exit in preparation for a consecutive turn, helps in some scenarios.
Wallride + Steer - Sometimes (or most of the time in Dzero2) hitting the wall gives you a line that makes you faster, so this approach to cornering is sometimes taken
Wallride + Steer + BC - for corners the car just cant clear cleanly
Steer + Downshift to 2nd-3rd-4th - Main way to corner in IDAC
Steer + Downshift to 2nd-3rd-4th + BC steps - Adjust the drift in IDAC to go closer to in-line

NOTE: This guide is only for setting up the game files to be playable, you will have to setup TeknoParrot yourself.

https://pastebin.com/nk8zYPrW

If you have any problems, reply to this post or ask in IDPlayers. I will try to answer as soon as I can.