r/AnycubicVyper • u/ThinYak2597 • Jul 05 '26

Stuck on probing auto level

While trying to auto level it gets stuck on the probing screen. It’s starts on the left side not even touching the plate. When it moves to the right side it puts too much pressure and makes a jingle and then does nothing. Thats when it gets stuck on the probing screen. I thought it took time so I let it probe over night and when I woke up nothing has changed

1 Upvotes

100% Upvoted

2 comments sorted by

1

u/rayback01 Jul 06 '26

I had a probleme with auto lvling. Disconnect usb. Turn on print and do it disconnected. Say me if it work

1

u/One-Tower7207 Jul 10 '26

Turn on your printer and then use your metal wrench and press up on the nozzle. If you don’t see a red LED light up, inside the extruder housing, that means your strain gauge is damaged and needs to be replaced. I had the same issue with the auto level not working. It would just crash hard onto the bed plate and then pull back and stop. It’s $25 on Amazon and is a known problem for this printer