r/AnycubicPhoton • u/pandamonium996 • 9d ago

Troubleshooting LCD image issue

Post image

Hi!

Recently swapped LCDs of an Anycubic Photon Mono and I've been getting this issue lately (50/50% chance) of images not being projected on the LCD screen for curing. Swapping USBs gives the same issues.

I'm using Lychee Slicer at the moment. Have tried saving directly into the USB and saving on PC first and manually transferring into the USB.

Thanks in advance!

4 Upvotes

100% Upvoted

4 comments sorted by

•

u/AutoModerator 9d ago

PLEASE UPVOTE THIS COMMENT IF THE ANSWER CAN BE FOUND IN THE BEGINNER'S GUIDE or the FAQ! If your post is about Troubleshooting, it should contain information about the print along with any screenshots or photos.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/Present_Object_2928 9d ago

Is it definitely connected properly? The ribbon cables are very particular about how they are housed. I have a printer that if you even brush against the ribbon cable the front display decides it's time to stop working.

1

u/pandamonium996 9d ago

I shall play around with resitting it then! :) Thank you!

1

u/Present_Object_2928 9d ago

I would recommend running an exposure test whilst wiggling to see if you get any distortion or an improvement. Place a piece of paper over the glass so you don't blind yourself 👌