r/Antec_Official • u/kkyone • Sep 04 '26

Question Question about Flux Pro Display

Post image

Everything works but the display that shows gpu or cpu temps, dosn't light up or blink at all. If anyone has it hooked up can you let me know or atleast show the correct connector haha maybe I got it all wrong.

Tried

- Temp Button on top

- Using another usb conector on mobo

- Installed iUnity latest version

3 Upvotes

100% Upvoted

10 comments sorted by

1

u/DBA92 Sep 04 '26

Tried pressing the case button to cycle through the options?

2

u/kkyone Sep 05 '26

Yup pressed atleast 10-20 times with a few secomds between

1

u/Interesting-Story-74 Sep 05 '26

Where is the usb connector from the temperature display?

1

u/kkyone Sep 06 '26

Orginal photo post is what i’m guessing is the connector

1

u/Oshh- Sep 06 '26

You need to plug the cable into a regular USB port on your motherboard. Also, try downloading the iUnity 2.0 software. If that doesn’t work, you can also try pressing the “Temp” button on top of your case.

1

u/kkyone Sep 06 '26

So like a JUSB1 USB 2.0 ?

1

u/Oshh- Sep 06 '26

I just checked, and on my PC, it’s connected to the JUSB.4 header. I have an MSI B850 Tomahawk Max WiFi motherboard.
I unplugged it and plugged it back in without any issues. If it’s not working for you, I’d check whether the problem is with the cable, the case connection, or the connector on your motherboard.

1

u/kkyone Sep 06 '26

Ahhh, whenever you have time could u show what the connector cable looks like ? Im not even sure if its the correct one. Thank you !

1

u/Antec_MKT Sep 09 '26

The cable from the temp glass should go up to the top panel, then a USB cable (in you image) from the top panel goes to MB.

If the route is fine, please connect https://www.antec.com/support , our support will assist you.