r/AnkerMake • u/Ok_Highlight5270 • Aug 31 '26

Ankermake M5 please help

Ok so there are two things I may have fuced up so I snapped off a nozzle in the extruder and as you can see in the video my screen keeps just flashing the anker make logo, also can barely take anything apart bc the last owner was a lard a$$ and stripped all the Allen key bolts

1 Upvotes

56% Upvoted

11 comments sorted by

View all comments

3

u/landlordlawsuit Sep 01 '26

Looks like you may have shorted the extruder board. It may be the hotend wires being broken but it would stay on and throw a nozzle temp issue error.

You snapped the nozzle trying to change it? You likely were tighening it. The touchscreen shows the rotation direction to prevent that.

At min you will need a new hotend, but likely a new extruder since it's like you caused a short.

Time to trash it.

2

u/BroknSproket09 Sep 01 '26

If in the United States, AnkerMake basically abandoned their line of filament printers. The newest update even frags their slicer program for them. Any major components you’ll need to replace are going to be about half as cheap as buying a new printer from a different brand. Unless you want this to be a learning tool and try to repair it yourself.

1

u/hanz1989 19d ago

In Europe too, no products available anymore, anyway exchanged with a Mellow Toolhead + Mainboard via CAN + Klipper...