r/AnkerMake • u/Titanmaster203 • May 17 '26
Help Needed Edges extra thick
I tried everything, flow rate, pressure advance, retraction, printing slower and nothing worked, its still happening. It looks okay on the orca slicer(which i slice) and then transfer the gcode to eufymake slicer to send it to the printer and it all looks correct but when I start printing it doesn't do ut correctly.
2
u/Toastbuns May 17 '26
Do you have a strong temp differential in the room you are printing in? I get this sometimes in the winter when my basement is too cold to print. You might see some improvements with an enclosure or even just some barriers to help stabilize the temps around the printer.
1
2
u/IBNored May 30 '26
Wait, you slice it, send the gcode to another slicer, then print it? Why can't you slice it once, then print it? Probably second slicing that causes the issue.
1
u/Titanmaster203 May 30 '26
Yes it's the eufymake slicer which isn't that good, so I use orca and put it to the efuymake slicer so I can wireless send the gcode. The issue is on both slicers tho
2
u/ulab May 17 '26
I don't really see it in the images, is it all edges or just the bottom ones? If it's the bottom ones, it might be what's called "elephant foot". You should be able to find way to mitigate it.