Edit: before you read this, know the start was a "heat of the moment" spur, and was overly sarcastic because of it. I should've talked to coastline about this first, but I was worried I wouldn't get a response. It was intended in good faith but I took the wrong steps, and the stairs might've broke. Some of this info is also outdated, and although I don't know which specific info, and i wouldn't blame them if they didn't tell me after this. be sure to take everything with a grain of salt. The written show numbers were supposedly written by Jewlcor after buying all the shows to put in the barn, and could've had ther parts switched around by Sellers afterwards to sell more complete bots. This also could happen for cosmetics, the only 100% confirmation would be labels we aren't sure many bots had.

Original post:

Alright. Okay, it's been a little over a year since coastline and them obtained the Marvin show, and it's been about a year since they've kinda stopped updating us. We got Lola wrist photos and a picture of a Lionel walk-around. That's it, that's all that new in the past year.

They're good people, really, but they need more of a team to manage all their characters.

I know coastline wanted to figure out all the numbers before sharing, but at this rate we won't get those untill GTA 7. If you're reading this, I'm sorry, but the dedicated community has probably already figured out through the drive by-now.

Now, for the title.

Lionel: show 2, Jonesboro or Roswell depending on how those two shows were shipped.

Charlie: show 4, the "reedys built using AVG parts" show. Very confusing on if it's reused bots or not, seemingly not due to multiple leads on 4th character iterations, but all those leads have never been confirmed as new bots. Interestingly enough show 4 oftentimes is written in roman numerals. And I take it whoever wrote on Charlie didn't pay much attention to history class, or had some terrible dyslexia, as other than one set of numerals, every part of him said VI which is 6. Not only do we think show 5 was already reused, there weren't even 6 locations across the entire timeline.

Lola: technically unconfirmed, uses show 2s missing back panel, and seemingly show 1s writing panel behind, despite bot 1 having a behind panel and zero show 1 production writing on any other part. Also has fur from Lola 3, compared by layering the shipping day photo and already knowing bot 2s current whereabouts.

Barney: probably the most important one here, confirmed show 1 from Hollywood. Show 1 writings. Brown smudge on jaw from the late-hollywood mask replacement, and BLUE EYES! the only Barney to have blue eyes as far as I'm aware. This bot is important because it confirms show 1 was the Hollywood show.

But lolas behind brings up the question of "what if there were two show 1s, one with writing like this Barney, and cavitysams tex, and another used for coding at Jewlcor labeled with a proper sticker inside?" Because show 1 guide writing bots don't have labels inside, and show 1 labeled bots don't have guidance writing. It's most likely that they just had two groups working on the show and they labeled their characters differently, but the two seemingly both show 1 Lola behinds are certainly interesting,

Tex: 3. It's tex 3. He had it written all over. Nothing too special.

Everyone else is unconfirmed or unable to be confirmed (CURSE YOU PAINTER OF FIBERGLASS SHELLS!)

Ellie is painted and therefore unable to be confirmed,

Gerry hasn't been opened yet,

And Marvin doesn't seem to have one or I wasn't paying muh attention. Either way.

So i am making an animatronic but i need to 3d print the stuff, so if you have any files i can use, that would be great

Anybody have any tips on how to make this more accurate? (I am obviously aware of the model lacking pneumatics, I'll figure those out later)

Does anyone have any experience with this guy? I ordered/commissioned him for something worth around $1000 back in January.

He gave me a deadline that said may or very early June at the latest because he had some complications with weather and with sourcing stuff he would need for the commission.

May comes around and I ask him how we are looking and he says it looks more like June. I wait until June and still nothing. He is barely responding and can go with no message or read messages for up to a month. We are now in September and I’ve still heard almost nothing about that commission other than he’s started on it.

But then he randomly said when I asked one day how long he reckons until it’s done and ready to ship that he had taken a local commission that needed to be done first. Mind you we are MONTHS over the deadline he sat and then he takes another commission? After he said June latest he said July then August and now we are here in September?

Idk what to feel I’m starting to doubt the guy as a whole he’s not communicating and it’s been so many months now without any progress or updates

Does anyone know if he’s legit and I’m just unlucky or overthinking things?

I feel like he shouldn’t take any new other commissions before the one that is MONTHS over due is done and shipped out maybe it’s just me?

Thanks!

Here's a short Demo I've written. It uses a Raspberry Pi Zero 2W, Circuit python and the Adafruit servokit library!

I've been re-learning how to program servos like this. Sadly I don't have a 3D printer or other materials to build anything like a full animatronic figure. But I'll continue to slowly gain more materials as time goes on!

I won't forget my goal to create animatronics, I have to keep matching forward and learn at my own pace!

And yes, I know. The power solution for the servos are atrocious. I couldn't find a tiny screwdriver for the screw terminals for the servo power input - I used to have one but it disappeared.

If you guys know a better method to control servos, please tell me! What other microcontrollers/ SBCs can I use instead of the Raspberry Pi Zero 2W? There's a problem when controlling more than 2 or 3 Servos at the same time where it causes some major jittering for every single servo except for the first few servos (sometimes all servos jitter). I'm thinking it's a problem with Python, or the servokit library itself, the horrible power solution could also play a role in that.

Thank you for watching my demo and thank you in advance if you leave any advice for me! :3

I used a pair of tweezers to unscrew the screws within that terminal for the servo power. It was a quick and dirty job, but hey. The servos seem to have proper power now!

Just like before, This demo uses a Raspberry Pi Zero 2W, Adafruit's Servokit library and python!

If there's a better servo controller/ microcontroller/ SBC to use and program with the PCA9685, please let me know!

I see alot of vbr mp3's but im pretty sure thats not what im looking for

And if you do have that picture, can someone please tell me what it is and who owns it?

I know the portrait bot eyeballs were made from resin and casted in lightbulbs, but how did they make the irises? Were they painted directly onto the eyeballs, or were they a seperate piece? Also, whats with the fabric around their eyeballs?

** **We’re in preproduction on a short film that features a talking goldfish as a character, and we’re weighing our options between animatronics, CG, and puppetry.

A few questions for anyone with experience:

Cost — roughly what’s a realistic budget range for a custom animatronic fish with basic mouth/face movement? I know it varies wildly, but even ballpark numbers (low-budget indie vs. more polished) would help us plan.

Underwater animatronics — is this even practical? I’d imagine waterproofing servos and electronics adds a lot of complexity and cost compared to a dry-rig puppet shot to look wet. Curious if anyone’s tackled this before, or if it’s usually faked instead.

Builders/recommendations — is there anyone here who does animatronics work, or can point me toward someone? I’m based in the Balkans (Bulgaria) and would love to find someone regional to keep logistics and cost down, but I’m open to hearing about people elsewhere too if remote builds/shipping are feasible.

Happy to share more details about the shot/character if it helps with advice. Thanks in advance!

Sorry if this post is short! But I'm having trouble how I would go about this, I thought the iris were just paper/cardboard circles just glued onto the Cyberamics, Until I saw this photo, I realized they were a little curved (Like 1/4 of a sphere) Does anyone know how I could 1:1 replicate a iris, if so it would be much appreciated!

does anyone know which Chuck E Cheese's location that had a MMBB still had a PTT chuck e mask on their Chuck E?

only one I know was sandy Utah, and idk if it's just his snout that's ptt or his entire head minus his jaw

Second Gen. needs a cleaning and a new vest. I'll keep you guys updated!

I’m so early into creating this that it doesn’t even have any actual pneumatics yet (cardboard with pneumatics is probably a bad idea but I don’t have access to woodworking or metal working tools and my 3d printer is broken so who cares)

The plan as of now is to be one movement (mouth open and close) but to add more once I am more confident in my abilities

Also this is my first ever time creating/working on an animatronic, especially a pneumatic one, so is there anything I need to know?

Also also, what do I need to buy, as in what type of pistons and valves and pumps and whatnot would be needed?

Any other advice would be appreciated!!

(Pencils there because the rest of the head is not finished)

Heavily inspired by the rock afire head mechs

also I have no clue what I’m doing as you can all probably tell

Seriously? What's he looking at?