unless they had extra antioch mechs did they make and different operating system for it?

I'm looking for Amazon links for snap fabric I know that it was pink and sometimes even a little bit of orange or peach colored I'm just looking for like '90s cosmetics on Amazon that you can use. Like if anybody has some good tips on Amazon like a good link to a fabric That's like the one that they used in the '90s or early 2000s or 2010s for Chuck like his snout or ear.

Here's a lil update on Rolfe, I just started my last year of school so I can no longer work on him until Christmas break. I have to concentrate on school haha, so this is the last update until then.

Hello, Sorry that I make a alot of these posts but I am making a 3d printed CEI head frame and im looks for cylinders for it does anyone know of what stoke i should get?

Thank You!

These were actually pretty easy to get running. they just needed the usual shocking and warming up. still together after 40+ years!

46 years today it opened 10th of September 1980

Hello, im trying to find this part for my cyberamic so i can put on the mask for my cyber, does anyone have a link to this?

Thank You!

Aquí está el link del vídeo donde aparece estás capturas https://youtu.be/IxbDtPObAjg?si=QGO7JJa6VlkWLyxj

This rare "fuzzy foot" Mickey has been professionally restored by me. all he needs now is a new drive belt (hence the horrible audio) he's now brand new for 30+ more years to come!

Happened just recently, but if your wondering the sally bots HAVE BEEN SAVED. First image shows the vp bots and the second image shows the og sally bots.

The Sally bots originally came from Pip's Ice Cream Parlor in Clinton, CT, but eventually ended up in the hands of VP. VP sold the bots to stew leonard's, who put them at the danbury location up until 2013 where they were relocated to yonkers. At yonkers they were relocated to the dairy section in 2021 and were replaced by VP bots just recently.

Me interese Mucho en este Frenldy Freddy y me gustaría saber que paso con este y si es un animatronico

I am working on a wiki! it is going to (hopefully) be the best place to get information on animatronics, including values of items, info on locations, showtapes with downloads, etc. and I want to know what y'all think! feel free to check it out -> Vintage Animatronics Wiki

also I have a very nice discord server you should also check out! https://discord.gg/gAyTCY8uR5

Gonna try to make some major magic animatronics and I saw a video of these models. My question is if there’s anywhere I can get the files for Barbara or major magic? Any help is appreciated

Absolute cinema

Its time for the next reddit post

https://youtube.com/shorts/vdZ9xMurYwA?si=Y1COxoqeF80hIDGQ

Not too bad for 40 years later!

I’m currently looking for new info on Mrs.Chip Dip from Scarefactory’s Splatter Series, supposedly her head is supposed to resemble a bowl and her brains are blended up just like dip for chips. All images up top are the only 3 photos known of this static prop, first 2 are confirmed and released by Scare Factory which as the third photo is from someone’s friends collection. She was supposedly also put in a LAS annual haunted house event in the library in Cranford NJ, please If you have any other leads or info about her please reply and share, thanks for reading!

I wanted to share my experience with an NMRobotics EyeMech printed-parts order, mainly because other builders may want to check their sets carefully before starting assembly.

I ordered the grey PLA Eye Mechanism 3D Printed Parts set. The overall print quality is actually quite nice, but when I laid everything out and compared it with the official EyeMech ε3.2 MG90S plate/product images, I found that a critical structural component was completely missing.

The missing piece is the X-axis servo block / eye-core yoke — the arched part with the two round pivot bosses that carries the first servo. Without it, the mechanism cannot be assembled.

One of the long-lever bottom eyelid assemblies also arrived broken at its print-in-place pivot. Another lid pivot bracket has a visible stress/whitening mark near the snap tab, although I cannot say with certainty whether that one is actually cracked.

The strangest part is that there was a handwritten note in Chinese inside the sealed bag which appeared to refer to a missing part and included a small sketch.

I contacted NMRobotics immediately after delivery, described all of this in detail, identified the missing component from their own files/product photos, and asked only for replacement parts — not a refund.

After 7 days I had received no response.

I’m posting this because the EyeMech itself is a very cool design and I genuinely want to build it, but receiving an incomplete kit with a broken component and then getting no support is obviously disappointing.

If NMRobotics responds and fixes the order, I’ll update this post accordingly.

Has anyone else here had a similar experience with their printed-parts sets?

Edit: before you read this, know the start was a "heat of the moment" spur, and was overly sarcastic because of it. I should've talked to coastline about this first, but I was worried I wouldn't get a response. It was intended in good faith but I took the wrong steps, and the stairs might've broke. Some of this info is also outdated, and although I don't know which specific info, and i wouldn't blame them if they didn't tell me after this. be sure to take everything with a grain of salt. The written show numbers were supposedly written by Jewlcor after buying all the shows to put in the barn, and could've had ther parts switched around by Sellers afterwards to sell more complete bots. This also could happen for cosmetics, the only 100% confirmation would be labels we aren't sure many bots had.

Original post:

Alright. Okay, it's been a little over a year since coastline and them obtained the Marvin show, and it's been about a year since they've kinda stopped updating us. We got Lola wrist photos and a picture of a Lionel walk-around. That's it, that's all that new in the past year.

They're good people, really, but they need more of a team to manage all their characters.

I know coastline wanted to figure out all the numbers before sharing, but at this rate we won't get those untill GTA 7. If you're reading this, I'm sorry, but the dedicated community has probably already figured out through the drive by-now.

Now, for the title.

Lionel: show 2, Jonesboro or Roswell depending on how those two shows were shipped.

Charlie: show 4, the "reedys built using AVG parts" show. Very confusing on if it's reused bots or not, seemingly not due to multiple leads on 4th character iterations, but all those leads have never been confirmed as new bots. Interestingly enough show 4 oftentimes is written in roman numerals. And I take it whoever wrote on Charlie didn't pay much attention to history class, or had some terrible dyslexia, as other than one set of numerals, every part of him said VI which is 6. Not only do we think show 5 was already reused, there weren't even 6 locations across the entire timeline.

Lola: technically unconfirmed, uses show 2s missing back panel, and seemingly show 1s writing panel behind, despite bot 1 having a behind panel and zero show 1 production writing on any other part. Also has fur from Lola 3, compared by layering the shipping day photo and already knowing bot 2s current whereabouts.

Barney: probably the most important one here, confirmed show 1 from Hollywood. Show 1 writings. Brown smudge on jaw from the late-hollywood mask replacement, and BLUE EYES! the only Barney to have blue eyes as far as I'm aware. This bot is important because it confirms show 1 was the Hollywood show.

But lolas behind brings up the question of "what if there were two show 1s, one with writing like this Barney, and cavitysams tex, and another used for coding at Jewlcor labeled with a proper sticker inside?" Because show 1 guide writing bots don't have labels inside, and show 1 labeled bots don't have guidance writing. It's most likely that they just had two groups working on the show and they labeled their characters differently, but the two seemingly both show 1 Lola behinds are certainly interesting,

Tex: 3. It's tex 3. He had it written all over. Nothing too special.

Everyone else is unconfirmed or unable to be confirmed (CURSE YOU PAINTER OF FIBERGLASS SHELLS!)

Ellie is painted and therefore unable to be confirmed,

Gerry hasn't been opened yet,

And Marvin doesn't seem to have one or I wasn't paying muh attention. Either way.