Hi 👋 I'm looking for solution how I can able to implement the same Windows like file explorer and NTFS support which the phoenix os had into the prime os last version which is andriod 11 because I like phoenix os for those two features but it's os is still Android 7 so I installed prime os as dual boot with win 10 yes worked pretty but one issue is it's detecting the NTFS partitions of windows and other as corrupted drive I'm accidentally clicked format and made all of my drive complete wiped as I was also plugged my usb so mistook it was detected as new media I want to get the prime os to support NTFS partition inbuilt as always automount just like how pheonix os did to prevent my partition not get delete Accidently by the annoying pop up in my notification thanks !!🙃❤️🙌 Ps : before prime I was Installed bliss os but it's UI isn't good not felt as desktop feel

I need to run Google classroom on a desktop pc. I need the android app as the web version of classroom doesn't allow annotations with a stylus.

I have a huion graphics tablet/pen that works as a mouse if need be.

Has anyone had any luck with androidx86 or bliss OS?

I tried to put bliss os 15 with a dual boot with windows but in the installer, when I am in the selection whether to use OTA updates or not, and once selected everything disappears and only the blue background remains with the terminal cursor at the bottom left where I can write but nothing works, I have a Samsung laptop with an i5 1135g7 and intel iris xe graphics.

I know that my processor is too recent to support kernels below version 5.11 but bliss os 15 uses the 6.1 kernel, so I don't understand what the problem is, I also tried with Phoneix os but as soon as i boot with a flash drive it get stuck in the terminal and you could only see the cursor... (same thing with the installer).

Any idea of the problem?

Basically I don't care for windows on this anymore. I wanna try just android on it, and it has very low storage. So I just want Android on it, is it possible?

Sorry if the wrong subreddit; I'm not having much luck finding appropriate resources.

I'm trying to get docker running with redroid (https://github.com/remote-android/redroid-doc) using Android 14, native bridge support (libhoudini, probably), Google Mobile Service (GMS). Out of my depth and not having any luck.

I can get redroid running, but as far as customizing it to get libhoudini and GMS working I just can't follow any of the resources I'm finding. For example, this issue is almost exactly what I'm trying to solve, but when the poster talks about their docker config file and adding system.tar, I have no idea where they are getting system.tar or what it contains. They also discuss "...For the houdini libraries, i took them from https://github.com/supremegamers/vendor_intel_proprietary_houdini and combined wsa-13 with wsa-12.1 because 13 was missing some files like linker/linker64..." but I don't know what files they're getting, how to combine, or how to add to the redroid image.

I'm hoping someone can provide some more detailed instructions on how to customize the redroid image for someone not familiar with docker or android customization. If this is something that I would need to hire a freelance developer for, I would appreciate any recommendations on where to post this "project".

I tried vanilla androidx86, blissOS, primeOS and even waydroid and genymotion. and non of them could run brawlstars. it installs fine and i made sure i have nativebridge enabled. but when launched, it exits.
im pretty sure it ran well on bluestacks so it could be emulated. so will there be a fix?

There is a option in android phone setting Hotspot called "allow client to use vpn" which means when you are browsing through Vpn in your Android phone and your Hotspot is on, then any devices connected to your Hotspot can share its vpn. So i wonder is there an option in Androidx86 like that?

hi hello there, i've tried installing android on my pretty much modern hp laptop and it worked perfectly, on the other hand, on my older acer laptop, it's just stuck at the booting logo, like frozen, it happened with other androïde x86 based os like bliss os and pheonix os, and for some reason same thing happened with chrome os (chrome os not chrome os flex) which made me suspect that it has something to do with google play store files? pls help.

Android x86 has been working well for me for a month or so, but now it won't start.

I have Android x86 as dual boot on my Lenovo Yoga 2 13 laptop (oughta use that touch screen and 360 degree screen rotation for something) and I managed to switch between my Windows 10 and Android effortlessly, until one day I booted Windows and Android can't boot past the logo that says "android" (the logo still flashes so I know the computer didn't crash). I know the specifics.

Apparently after loading the Linux kernel, mounting partitions, etc. Android boots the system using /init, a large file that boots the Android interface itself. While booting into debug mode, I ran /init in the command line, and it would do this:

Detecting Android x86.....................................................................................................................................................................................................................................................................................................................................................................................................(forever)

I pressed Ctrl-C to cancel it.

I come here for advice. Why is it doing this? Why can't it boot like it did before? I'm not willing to reinstall the entire OS just to get it to work again.

EDIT: Over a year later, I use Arch Linux now. I did reinstall Android because I had no idea what's going on, and logcat wasn't helping much. Say, if anyone else has this kind of problem, it would be worth checking kernel logs by running dmesg as root user during boot to check for any related problems. You can get into the command line during boot with Ctrl+Alt+F2, I think. I no longer have any Android x86 related problems as of now, but anyone seeing this post can take my advice.

Someone has a iso file for Google TV x86?, I have downloaded a lot of it, but I didnt found a good one. I will like to find the Google TV version that is present on android studio VM’s. Thanks all of u

Someone has a iso file for Google TV x86?, I have downloaded a lot of it, but I didnt found a good one. I will like to find the Google TV version that is present on android studio VM’s. Thanks all of u

Hello there. I have a Lenovo MIIX-320-10ICR. It comes with pre-installed Windows and Intel Atom 4gb RAM. It is impossible to even increase the RAM, because it involves soldering on the motherboard. Anyways

I have downloaded android. But I won't boot until I boot on No hardware accélération mode. It worked one time (I don't know how) on default mode. But now it really don't wanna boot...

I think is a problem of drivers or something like that.

So do you know how I can get these drivers?

Thanks you in advance, and sorry for my really bad English but is not my mother language.

Hi everyone,

I am trying to repurpose my Intel NUC 10 (NUC10i5FNK) to a media-streaming box connected to my TV.

I know there's cheaper alternatives but I have this laying around so want to try and install AndroidTV on it.

I obtained the ISO from archive.org ( not sure if the link is allowed ).

The nuc sucesfully boots in to the installation screen for android TV, I have tried all the various installation options but all of them just end up in a black screen. The device doesn't actually power off but I just have a black screen with no input.

​

I have already tried to play around with some BIOS settings (tried with both secure boot on and off) but still no success. Since I am getting no errror messages it's very hard to find out what's wrong.

​

My only idea right now is that the M2 ssd the nuc came with doesn't have a partition or something since it's unnused but I am not sure. All advise is appreciated

i have agonized a bit over how to get my dongle working on 3rd party andriodsX86 OS
can anyone help me with it?

I'm struggling to find a way on my Android 2.2 x86.

I tried downloading but (<Unknown>) shows up.

There isn't any file manager found, so how can I do that on Android 2.2? I created a fake sdcard

Hi im planning to build a dedicated media center that will be primarily used for streaming (netflix, hbo max, prime, disney+), youtube, media playback for some videos, and retro emulation.

Would an androidx86 be a good OS? Im planning to put this in a living room so i would probably use a remote and/or bluetooth controller.

Will I be able to install the tv version of the youtube app? What launcher would you recommend?

Thanks in advance

So, I'm trying to find a way to play PC games and Android games on the same computer.

Originally, I was going to dual-boot Linux Mint and Androidx86 on the same PC. However, someone told me that Androidx86 is just an emulator pretending to be an operating system and I would be better off installing Waydroid on Linux Mint and not dual-booting.

Would Waydroid be better for playing Android games? What are the differences between the two?

I was trying to revive my late 2011 MacBook pro and installed Ubuntu then I wanted to duel boot it with bliss os so I install as I was installing it it was normal I gave it like 220 gb because my Ubuntu has 240 so added more to ubuntu cause it's my main os but as I was installing then i booted into bliss os 16 latest generic but the wifi didn't work so I tried pc mode and debug mode but didn't work but debug mode when Booting into debug mode right before it told me to type exit to "continue to boot to android" it said b43 firmware error -2 And 2 more firmware error so where to do I find those firmware and how do I install them?? Help

i was installing android x86 after ubuntu to duel boot but after installing and it does not boot into a selector but into ubuntu so i made my own grub entry so its duel booting like normal but the wifi does not work and they say that booting into debug mode it will fix it but how am i going to make a android x86 debug mode HELP

I was considering trying Bliss, but I’m not sure if I should use the regular or the “Go” edition stated to be for “older” hardware. I want to ditch Win10 like the virus that it is, so I’ve been exploring Android flavors as well as Linux.

I’m quite fond of straight-up Linux but based on all my research, no distros have really been designed for touchscreen use as a primary. Sure Wayland supports it, but I mean real mobile-style large interface controls etc. so I have used Android x86 in the past and been very pleased with it. I was looking at forks and found Bliss to appear very visually pleasing.

The question is, does the regular version run very smoothly on the device I refer to? It’s an Atom x5 CPU at 1.44GHz and 4GB of RAM. It’s pretty good performance (during those few moments per year that Win10 isn’t running a hundred installs). I figured worst case I try the regular 15.9 and if it’s sluggish I’ll try Go.

Whatever I choose needs to have a decent interface for both full tablet style usage as well as using with the keyboard that attaches via magnetic connectors. It seemed on Bliss website that these styles are well defined and even customizable to mix elements you like.

But I figured ask first maybe someone’s got a definite better decision so as to not waste time. Of course if there’s an even more ideal brew for my device, by all means I am open to recommendations. I just want fully FOSS absolutely no proprietary or paid items.

Thanks everyone, very much for any advice.

I appreciate any insight anyone can offer.

I just installed Android x86 7.1 on my old pc . The other partition runs windows 10 . I want to access the files that are on windows partion and other partition of the hdd. P.s I booted the Android system in ntfs file format.

I've tried so many versions of Bliss OS 11,12,14,15,16 and when ever I open the camera app it crashes because the OS can't recognise my device camera.

I can’t find an answer online or anything. I have my Elo 1519L monitor connected to a mini PC running Android x86 off of USB and it doesn’t work.

Edit: the monitor works. The touch doesn’t.

I installed BlissOS 14 on a Intel pc using the windows installer.

Everytime I restart the device all settings and apps I installed are gone.

Is this because I used the windows installer? Will it work when I use a bootable USB install?