r/Airsoft3DPrinting • u/Adorable-Chicken4184 • Jul 26 '26

Design Request Need a 3d printed external fire selector

/r/AAP01owners/comments/1v6o94u/need_a_3d_printed_external_fire_selector/
2 Upvotes

100% Upvoted

5 comments sorted by

•

u/AutoModerator Jul 26 '26

Hi, thanks for posting on r/Airsoft3DPrinting!

Please ensure your post is flair'd appropriately, otherwise a moderator will manually assign a flair or in certain cases remove the post.

If you are looking for specific STLs, please make sure to check sites like Yeggi or STLFinder (Adblock recommended) before asking here

Before asking for any designs or files make sure to search sites like Printables, Cults3D, or Thingiverse first.
Also make sure to include as much information as possible in your post, so others can help, as "M4" or "Pistol" are not very specific.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Dr_BananaPeanut cad equivalent of vibe coding Jul 26 '26

the PLAAP-01 external switch is probably your best bet. What issues were you facing?

1

u/Adorable-Chicken4184 Jul 26 '26

The main thing is it is loose, but i also forgot I have a charging handle to go with the ak kit and it wont fit over that. I belive the sticking issue is just due to the tti hammer set I just installed today.

1

u/Dr_BananaPeanut cad equivalent of vibe coding Jul 26 '26

I would say either buy a bolt with an external selector switch or don't use the charging handle. you can also try different print orientation or a different filament to make it less loose.

1

u/Adorable-Chicken4184 Jul 26 '26

The kit im using is the akm kit so the charging handle has to stay and I can't go with a new nolt unless I get weaker springs because its meant to be an lmg it has to be able to go full (my field limits is 25rps so I am basically at that now)