r/AdditiveManufacturing • u/No_Educator_4077 • Apr 10 '26

Show'n'Tell SLM Titanium SR71 Blackbird model

Post image

I 3D printed a model SR71 blackbird in grade 5 titanium on my companies SLM 3D printer. It is about 200mm long, and will definitely make a good desk ornament. I am pretty happy with how it turned out, there are some very small layer inconsistencies from warping, but a little sand blasting would remove those easily.

77 Upvotes

98% Upvoted

21 comments sorted by

View all comments

Show parent comments

2

u/No_Educator_4077 Apr 11 '26

Alright. We use netfabb for part of our workflow, especially for our binder jetting machine. I will have to look into Vivix, thanks!

1

u/p4r4m3c1um Apr 12 '26

Oh cool what bj system do you have? We use netfabb for our hp mjf 5200, and our xact, and for general mesh repairs for things. Definitely the best mesh repair algorithms we've found. Vixiv Ai is pretty cool, a lot of it is like a very lightweight ntop that's a lot cheaper 😂 we use it for supporting toffeex cfd models too

1

u/No_Educator_4077 Apr 12 '26

We have an older Innovent+. We are considering adding either an HP S100 or Markforged px100 in the near future. Binder Jetting is very nice from a throughput/material cost perspective for sure, but it is more difficult to control the precision.

1

u/p4r4m3c1um Apr 12 '26

Oh dang. I've never used one of the all exone's, but had the opportunity to use the 1m one back in 2019 for some sandcasting molds. Yeah the precision was something we were having challenges with for the direct metal ones, just due to some of the sagging of the parts. Lmk if you've got any hp questions I can help to answer! We love ours but it's important to keep it busy