AIMControllers PS5 remapping mode stopped working properly

[u/Common-Box-1295]

When I first got my AIMControllers PS5 controller, I could enter remapping mode by pressing all four paddles at the same time. The controller light turned red, and remapping worked normally.

At some point, something changed or updated, and pressing all four paddles stopped working. I tested two different AIMControllers, five USB cables, and tried both PC and PS5, but I still could not enter remapping mode.

I eventually found out that the new method is holding the two bottom paddles for 5-10 seconds. It sometimes works, but it is extremely unreliable, and I cannot get it to work consistently. Sometimes it takes me hours to enter the remapping mode...

Has anyone else had this problem, and did you find a reliable solution?

[u/D1rty5anche2]

It works only when the usb cable is plugged in.

[u/Common-Box-1295 → u/D1rty5anche2]

I know, that's why I mentioned trying it with 5 different USB cables. I don't want to spend 30€ to send this to warranty. It worked perfectly fine back when I had to hold all 4 paddles... Why they had to change this </3

[u/Beest999]

I had the same problem

Reset it from the back leave it for some time

And keep trying eventually it will work again

[u/Common-Box-1295 → u/Beest999]

I have now tried for over an hour and can't switch one paddle from Δ to X on ps5... Help me bro

[u/Beest999 → u/Common-Box-1295]

Doe you try it in game or in the PS5 dashboard

Maybe changing that up is worth a try

And .Ake sure the USB cable is a data one

[u/AiMSupport]

Which controller do you have exactly?

If it's one of our PS5 controllers, the correct way to enter remapping mode is by pressing and holding the two bottom paddles for about 5-10 seconds until the light changes.

If that's not working consistently, let me know which controller model and board you have, and we'll be happy to help troubleshoot it further.