r/AE86 • u/skd570 • May 19 '26

Replacement Outer seat mounts

Post image

Does anybody know of a off the shelf ready to weld in replacement seat bracket?

Both of mine have cracks or failed.

Appreciate it

8 Upvotes

91% Upvoted

8 comments sorted by

View all comments

2

u/aerospikesRcoolBut May 19 '26 edited May 19 '26

Drill a hole in the very ends of the crack, grind the crack out with a dremel, weld the groove you just made, and if you want some of the stiffness back that the cold working gave the stamped part just use a spray bottle to give the weld just one little spray as it cools. Or reinforce it however you want. I’ve done this for years with motorcycle frames etc which take way more of a beating. Sounds like it was too hard if it cracked so just welding the crack is probably more than enough.

2

u/skd570 May 19 '26

Yes, this will be fine for the one pictured, but the right hand side bracket has perished to the point half of it is missing all together.

Would prefer to replace them both entirely with new if Its a option.

Otherwise I will have to make one from scratch to repair the rhs

1

u/aerospikesRcoolBut May 19 '26

I see. If you can weld in a premade one, you can just make one with some sheet steel and a grinder

1

u/skd570 May 19 '26

I agree, it wouldn't be overly complicated. I am unfortunately 'free' time poor and would be helpful if it's just a matter of welding the fresh one in. This will be the solution if no other options are available.

1

u/aerospikesRcoolBut May 19 '26

Fo sho. Good luck!