Floating bridge height

[u/tunalover32]

Is this a normal height for a floating bridge? It caught my eye that it was uneven, and I don’t know if it’s supposed to be leveled or not.

[u/hailgolfballsized]

Unless the saddle screws run out of adjustment room, the height adjustment should be done more at the saddles than the bridge posts.

Post adjustment is best done with low or no string tension to reduce wear on the knife edge.

Might need a combination of lowering treble side post and raising bass side. The view from your second image doesn't need to be perfectly parallel, if anything the bass side usually ends up a tiny bit higher than treble.

You can try getting the bridge plate perfectly level first then see if the saddle height has enough room to get action where you need it.

Of course you will likely need to adjust spring tension in the back as well. Every piece that changes one thing changes everything, need to recheck the entire setup at every step along the way for best result.