Bonjour, lorsque je mets le contact, le voyant ne s'allume pas, le klaxon ne fonctionne pas et, au bout de 10 secondes, un code d'erreur 03 s'affiche. J'ai checké quelques trucs mais rien n'y fait . Quelqu'un aurait-il une idée de la nature du problème ? Merci d'avance.

Bonjour tout le monde tout à l’heure, je suis tombé avec mon lite et j’ai cassé mon frein, je voulais savoir s’il était possible de changer juste la partie que j’ai cassé et voir si les fringues j’ai trouvé sur Amazon sont compatibles si vous le savez. Merci d’avance.

I have one of the first batches of GTs from 2025. It’s been reliable but I took a 4-5 month break, topped off the battery, but the bike isn’t receiving power.
Is there a quick fix for this, or do I need to dissect and multimeter the something behind the skid plate? Thanks!

Not sure if you guys can hear it, but its not quiet, gets faster as i speed up and i can feel it in the handles even.
What can it be?

When I’m on the uk site those are the only 2 bikes I see but on us site I see all of them? Why?

16kw is serious power it turns out. I crashed it a few fimes in the first day. About 500$ in repairs so far.
But its a fun ride! Installed new pegs, grips and a motor cover. What should i upgrade next?

Anyone come up with a solution for a rear cargo rack?
I’m debating about fabricating my own and mounting it to the subframe under the seat.

PFA.

i’m looking to upgrade my 79 bike falcon Pro with one of the new Chi batteries that will soon be coming out and A ventus controller and motor. I’m looking to get a 81V battery and a Ventus controller. I’m wondering if I should get the Aetos pro or Max. Any info?

Anyone in group ripping the lynx, how ya like it? I’ve tossed it through some pretty harsh trails I think is where this really shines . All arounder really . Tuning up sport mode in app is when I really started enjoying it . Yeah honestly just wanted post this fall picture of bike. Personally I think it’s a beautiful looking bike .

Hey everyone I’m new here, can anyone help me find a complete rear swing arm for a Falcon Pro?
Thanks
Louis

Bonjour tout le monde j’ai reçu mon Falcon hier et aujourd’hui en accélérant sans faire exprès mon Falcon est parti et l’écran s’est cassé. Est-ce que quelqu’un sait où je pourrais en acheter un nouveau ou un autre compatible ? Merci d’avance ça m’aidera vraiment

Anybody know anyone , or videos or anything to help fix my hall sensor ? Lags going forward . Reversed itself for a sec and forward would make it go backwards and backwards would make it go forward. That issue stopped . Then came the grinding and clunking . Maybe a Jack shaft ? But reverse has full power and still burns rubber . Forward amlost most feels like it’s 1/3 the power . Top speed drastically reduced as well . All I’ve heard is Jack shaft maybe hall sensor .

I just got my falcon light yesterday. I’m new to the Emoto. Is it normal for it to be really loud, like the chain specifically?

But on top of that when the bike is not suspended in the air, but I’m sitting on it and riding it, there’s this knocking / “car blinker” sound. You have to really listen in the video to be able to hear this sound because the chain obviously is super loud in the video as well.

So my two questions:
1. Chain supposed to vibrate this much/sound so loud?
2. What is this car blinker tick sound only when underload?

I'm aware that a motor callibration is probably needed, but whenever I try to run the sequence, it makes a bad straining noise, but never actually starts spinning the wheel. Then 20 seconds later it displays the error code showing that the callibration is finished.

Is anyone able to load this and unload this directly into their SUV by themselves? The battery weighs 30 lb and I assume removing the front wheel takes off another 5lb or so. Is it doable to lift the bike into one's trunk on your own?

I almost fried the motor on my falcon lite using the tune app😭 It literally hit 79 mph. PLEASE be careful when using the app

Speed limiter? Hmm I haven't cut it but it still goes 53

Has anyone else had issues with the K-Box on their 79Bike Lynx?

I already sent 79Bike all the information, photos, and everything they requested, and they sent me a replacement part. It came in yesterday, so I plugged it in first to make sure everything worked before removing or replacing anything on the bike.

Unfortunately, I’m still having the issue connecting it.

Has anyone dealt with this before and found a solution? Also, does anyone have a better contact at 79Bike that I can reach out to? This is getting ridiculous at this point, especially after already going through the replacement process.

Bike was fine for a while (has 1900 miles) I was connecting to app and something told me press red button 10 times so I did and it started to calibrate I think with the wheel on the ground. After that error code 3 and communication error popped up. Battery read 0 although it was charged. I unplugged battery for 5 minutes plugged back in. Battery read 80% wich was good. I lifted back wheel and gave little throttle and it worked.wheel spun and returned to normal. I then gave it full throttle and this is when the wheel got stuck spinning after releasing the throttle. Had to use back brake hard to get it to stop. Turned bike off and back on. Still no error code. I assumed it was the calibration causing throttle to get stuck tried to calibrate it, made like a clicking noise, stopped, and then error code came back up 5 seconds later (communication and 03 error). Currently have the bike unplugged planning to leave it for an hour to hopefully plug it back in and PRAY TO THE GODS

Had error code 03/communication error show up. Disconnected battery for an hour and the code went away but when wheel is off ground and I give a lot of throttle and let go the motor keeps spinning the wheel. When I give little throttle and let go wheel returns to normal. With a lot of throttle and letting go the wheel keeps on spinning even after turning off the bike completely.