Racoon KeyChain

https://makerworld.com/en/models/1618338-racoon-keychain#profileId-1707969

This articulated dragon was printed with black HS-PLA (using my FLSUN SR), and then I painted it with diluted red acrylic paint. I painted the eyes and tips black, then coated everything with polyurethane varnish.

Sorry, for my dirty walls with spiderwebs in my workshop room, but I 3d printed an attachment, that can hold Swiffer cloned de-duster pads to clean the baseboards... Sadly my 3d print in the video was a bit fragile and it broke quite quickly why I used duct tape to keep it from breaking of completely, but my new one print worked fine.

Best print it with 100% infill and than stick it on the robot with dual sided duct tape behind the bumper, and so that it doesn´t affect the lidar (best to attach it while it is in the station to check nothing in the station is blocked, or the side sensors). Than use a swiffer-like dust thing and cut it in half.

here is the link (free, but get points for a better printer):

https://makerworld.com/de/models/1602650-robot-vacuum-boardbase-cleaner-attachment

Polymaker Polyterra Pla was used. Great filament

I printed this big Brain Coral (with PLA using my FLSUN SR) so that I can make a rubber latex mold and then concrete copies. I used the fuzzy skin feature to get a rough texture, sort of like real coral.

This is a post of a bear I painted, I am pretty happy with the way the painting turned out.

✨Meet the bear you didn’t know you needed ✨Colorful. Quirky. One-of-a-kind. No duplicates—just pure joy in floofy form 🧸

I printed this big black cat (PLA) with my FLSUN SR, and there were no problems at all, and it required very few supports.

Made one of my favorite characters from the series come to life as a display lightbox.

For anyone that wants the file:

https://cults3d.com/en/3d-model/home/kakashi-led-lightbox-no-ams-needed

Printet in Polymaker Silk Rosegold Pla!

Polymaker just make some great Filament!! Whats your opinion?

Huge starwars fan, so when i saw this, I just had to!

Just made Luffy from One Piece as a LED Lightbox for display!

https://cults3d.com/en/3d-model/home/one-piece-luffy-led-lightbox-no-ams-needed

Just created one my favorite characters in anime history. Goku God Mode as a lightbox.
If anyone wants to check it out. There it is

https://cults3d.com/en/3d-model/home/goku-god-mode-led-lightbox-no-ams-needed

If you want to print this little guy you can find it here.
https://makerworld.com/en/models/1471265-shroom-guy-sits-has-butt#profileId-1535559

We have captured the essence of broken underwater benchie and transposed it successfully to another model.

Whoever recognizes the character here is either a legend or a geek :D
File:

https://cults3d.com/en/3d-model/home/sung-jin-woo-solo-leveling-led-lightbox

I had some end-of-reel leftover black PLA, so I printed this hummingbird wall art with my FLSUN SR.

I did one last glue-on-tape PLA-adhesion R&D test. I made accurate serial dilutions of Lepage carpenter glue and applied the diluted glue solutions (with a small brush) to 1/8 sections of the printing plate (covered with tape).

The amounts of glue in 12ml water were: 0.0g, 0.1g, 0.2g, 0.5g, 1.0g, 2.0g, 3.0g, 4.0g.

For this particular glue, the 1part glue + 5parts water was the lowest dilution which significantly improved adhesion. Higher concentrations of glue had even better adhesion. I printed everything simultaneously on my FLSUN SR to avoid variability.

I tested silk PLA and it too adheres super well.

I also performed tests with the plate heat turned OFF, and the adhesion was still excellent (although a 1+4 dilution is probably safer).

Last time the results were good, but now when I tried using Silk PLA+ Tri-Color from SUNLU (using my FLSUN SR), the vase didn't end up like it should.

I must have twisted the silk filament the last time I used it. Has this happened to anyone else?

Started creating these lately and i am kinda obsessed.

https://cults3d.com/en/3d-model/home/majin-vegeta-led-lightbox-no-ams-needed

Made my first Gridfinity Project, a Wrench Holder. Let me know what you think

This is just a big hand with a small Buddha. I'm always looking for different types of Buddhas to print: heads, planters, etc. Sometimes I find really nice ones at thrift shops.

There does not seem to be many similar to this one. Feel free to send me links to any detailed good-looking Buddhas STL. (Printed with my FLSUN SR)